DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

PIC16LF720 View Datasheet(PDF) - Microchip Technology

Part Name
Description
Manufacturer
PIC16LF720
Microchip
Microchip Technology 
PIC16LF720 Datasheet PDF : 254 Pages
First Prev 21 22 23 24 25 26 27 28 29 30 Next Last
PIC16(L)F720/721
3.6 Time-out Sequence
PWRT time-out is invoked after POR has expired. The
total time-out will vary based on oscillator configuration
and PWRTE bit status. For example, in EC mode with
PWRTE bit = 1 (PWRT disabled), there will be no time-
out at all. Figure 3-5, Figure 3-6 and Figure 3-7 depict
time-out sequences.
Since the time-outs occur from the POR pulse, if MCLR
is kept low long enough, the time-outs will expire. Then,
bringing MCLR high will begin execution immediately
(see Figure 3-6). This is useful for testing purposes or
to synchronize more than one PIC16(L)F720/721
device operating in parallel.
Table 3-5 shows the Reset conditions for some special
registers.
3.7 Power Control (PCON) Register
The Power Control (PCON) register has two Status bits
to indicate what type of Reset that last occurred.
Bit 0 is BOR (Brown-out Reset). BOR is unknown on
Power-on Reset. It must then be set by the user and
checked on subsequent Resets to see if BOR = 0,
indicating that a Brown-out has occurred. The BOR
Status bit is a “don’t care” and is not necessarily
predictable if the brown-out circuit is disabled
(BOREN<1:0> = 00 in the Configuration Word register).
Bit 1 is POR (Power-on Reset). It is a ‘0’ on Power-on
Reset and unaffected otherwise. The user must write a
1’ to this bit following a Power-on Reset. On a
subsequent Reset, if POR is ‘0’, it will indicate that a
Power-on Reset has occurred (i.e., VDD may have
gone too low).
For more information, see Section 3.5 “Brown-out
Reset (BOR)”.
TABLE 3-4: TIME-OUT IN VARIOUS SITUATIONS
Oscillator Configuration
Power-up
PWRTE = 0 PWRTE = 1
EC, INTOSC
TPWRT
Brown-out Reset
PWRTE = 0
TPWRT
PWRTE = 1
Wake-up from
Sleep
TABLE 3-5: RESET BITS AND THEIR SIGNIFICANCE
POR
BOR
TO
PD
Condition
0
u
1
1 Power-on Reset
1
0
1
1 Brown-out Reset
u
u
0
u WDT Reset
u
u
0
0 WDT Wake-up
u
u
u
u MCLR Reset during normal operation
u
u
1
0 MCLR Reset during Sleep
Legend: u = unchanged, x = unknown
FIGURE 3-5:
TIME-OUT SEQUENCE ON POWER-UP (DELAYED MCLR): CASE 1
VDD
MCLR
Internal POR
PWRT Time-out
Internal Reset
TPWRT
DS41430D-page 30
2010-2013 Microchip Technology Inc.

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]