PIC16F753-I/SLQTP View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC16F753-I/SLQTP Datasheet PDF : 238 Pages
| |||
PIC16F753/HV753
REGISTER 5-13: SLRCONC: SLEW RATE CONTROL REGISTER
U-0
U-0
R/W-1/1
R/W-1/1
U-0
U-0
U-0
U-0
—
—
SLRC5
SLRC4
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7-6
bit 5-4
bit 3-0
Unimplemented: Read as ‘0’
SLRC<5:4>: Slew Rate Control Register bit
1 = Slew rate control enabled
0 = Slew rate control disabled
Unimplemented: Read as ‘0’
REGISTER 5-14: ANSELC: PORTC ANALOG SELECT REGISTER
U-0
—
bit 7
U-0
U-0
U-0
R/W-1
R/W-1
—
—
—
ANSC3
ANSC2
R/W-1
ANSC1
R/W-1
ANSC0
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7-4
bit 3-0
Unimplemented: Read as ‘0’
ANSC<3:0>: Analog Select Between Analog or Digital Function on Pin RC<3:0> bits
1 = Analog input. Pin is assigned as analog input.(1)
0 = Digital I/O. Pin is assigned to port or special function.
Note 1: Setting a pin to an analog input automatically disables the digital input circuitry, weak pull-ups, and interrupt-on-
change if available. The corresponding TRIS bit must be set to Input mode in order to allow external control of
the voltage on the pin.
DS40001709A-page 54
Preliminary
2013 Microchip Technology Inc.
Share Link: 