PIC16C711-04SS View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC16C711-04SS Datasheet PDF : 176 Pages
| |||
PIC16C71X
FIGURE 8-2: CONFIGURATION WORD, PIC16C710/711
CP0 CP0 CP0 CP0 CP0 CP0 CP0 BODEN CP0 CP0 PWRTE WDTE FOSC1 FOSC0
bit13
bit0
bit 13-7 CP0: Code protection bits (2)
5-4: 1 = Code protection off
bit 6:
0 = All memory is code protected, but 00h - 3Fh is writable
BODEN: Brown-out Reset Enable bit (1)
1 = BOR enabled
0 = BOR disabled
bit 3:
PWRTE: Power-up Timer Enable bit (1)
1 = PWRT disabled
0 = PWRT enabled
bit 2:
WDTE: Watchdog Timer Enable bit
1 = WDT enabled
0 = WDT disabled
bit 1-0:
FOSC1:FOSC0: Oscillator Selection bits
11 = RC oscillator
10 = HS oscillator
01 = XT oscillator
00 = LP oscillator
Register: CONFIG
Address
2007h
Note 1: Enabling Brown-out Reset automatically enables Power-up Timer (PWRT) regardless of the value of bit PWRTE.
Ensure the Power-up Timer is enabled anytime Brown-out Reset is enabled.
2: All of the CP0 bits have to be given the same value to enable the code protection scheme listed.
FIGURE 8-3: CONFIGURATION WORD, PIC16C715
CP1 CP0 CP1 CP0 CP1 CP0 MPEEN BODEN CP1 CP0 PWRTE WDTE FOSC1 FOSC0
bit13
bit0
bit 13-8 CP1:CP0: Code Protection bits (2)
5-4: 11 = Code protection off
10 = Upper half of program memory code protected
01 = Upper 3/4th of program memory code protected
00 = All memory is code protected
bit 7:
bit 6:
bit 3:
MPEEN: Memory Parity Error Enable
1 = Memory Parity Checking is enabled
0 = Memory Parity Checking is disabled
BODEN: Brown-out Reset Enable bit (1)
1 = BOR enabled
0 = BOR disabled
PWRTE: Power-up Timer Enable bit (1)
1 = PWRT disabled
0 = PWRT enabled
bit 2:
WDTE: Watchdog Timer Enable bit
1 = WDT enabled
0 = WDT disabled
bit 1-0:
FOSC1:FOSC0: Oscillator Selection bits
11 = RC oscillator
10 = HS oscillator
01 = XT oscillator
00 = LP oscillator
Register: CONFIG
Address
2007h
Note 1: Enabling Brown-out Reset automatically enables Power-up Timer (PWRT) regardless of the value of bit PWRTE.
Ensure the Power-up Timer is enabled anytime Brown-out Reset is enabled.
2: All of the CP1:CP0 pairs have to be given the same value to enable the code protection scheme listed.
DS30272A-page 48
© 1997 Microchip Technology Inc.
Share Link: 