PIC16F1513T-I/SS View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC16F1513T-I/SS Datasheet PDF : 360 Pages
| |||
PIC16(L)F1512/3
REGISTER 12-4: LATA: PORTA DATA LATCH REGISTER
R/W-x/u
LATA7
bit 7
R/W-x/u
LATA6
R/W-x/u
LATA5
R/W-x/u
LATA4
R/W-x/u
LATA3
R/W-x/u
LATA2
R/W-x/u
LATA1
R/W-x/u
LATA0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-0
LATA<7:0>: PORTA Output Latch Value bits(1)
Note 1: Writes to PORTA are actually written to corresponding LATA register. Reads from PORTA register is the
return of actual I/O pin values.
REGISTER 12-5: ANSELA: PORTA ANALOG SELECT REGISTER
U-0
—
bit 7
U-0
R/W-1/1
U-0
R/W-1/1
R/W-1/1
—
ANSA5
—
ANSA3
ANSA2
R/W-1/1
ANSA1
R/W-1/1
ANSA0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-6
bit 5
bit 4
bit 3-0
Unimplemented: Read as ‘0’
ANSA5: Analog Select between Analog or Digital Function on pins RA5, respectively
0 = Digital I/O. Pin is assigned to port or digital special function.
1 = Analog input. Pin is assigned as analog input(1). Digital input buffer disabled.
Unimplemented: Read as ‘0’
ANSA<3:0>: Analog Select between Analog or Digital Function on pins RA<3:0>, respectively
0 = Digital I/O. Pin is assigned to port or digital special function.
1 = Analog input. Pin is assigned as analog input(1). Digital input buffer disabled.
Note 1: When setting a pin to an analog input, the corresponding TRIS bit must be set to Input mode in order to
allow external control of the voltage on the pin.
DS40001624C-page 104
2012-2014 Microchip Technology Inc.
Share Link: 