PIC18F26K22-I/SO View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC18F26K22-I/SO

28/40/44-Pin, Low-Power,High-Performance Microcontrollers with XLP Technology

Microchip Technology 

PIC18(L)F2X/4XK22

27.0 ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings (†)

Ambient temperature under bias.............................................................................................................-40°C to +125°C

Storage temperature .............................................................................................................................. -65°C to +150°C

Voltage on any pin with respect to VSS (except VDD, and MCLR) .................................................. -0.3V to (VDD + 0.3V)

Voltage on VDD with respect to VSS

PIC18LF46K22 ......................................................................................................... -0.3V to +4.5V

PIC18F46K22 ........................................................................................................... -0.3V to +6.5V

Voltage on MCLR with respect to VSS (Note 2) ............................................................................................0V to +11.0V

Total power dissipation (Note 1) ...............................................................................................................................1.0W

Maximum current out of VSS pin (-40°C to +85°C) .............................................................................................. 300 mA

Maximum current out of VSS pin (+85°C to +125°C)............................................................................................ 125 mA

Maximum current into VDD pin (-40°C to +85°C) ................................................................................................ 200 mA

Maximum current into VDD pin (+85°C to +125°C) ................................................................................................85 mA

Input clamp current, IIK (VI < 0 or VI > VDD) 20 mA

Output clamp current, IOK (VO < 0 or VO > VDD)  20 mA

Maximum output current sunk by any I/O pin..........................................................................................................25 mA

Maximum output current sourced by any I/O pin ....................................................................................................25 mA

Maximum current sunk byall ports (-40°C to +85°C)........................................................................................... 200 mA

Maximum current sunk byall ports (+85°C to +125°C)......................................................................................... 110 mA

Maximum current sourced by all ports (-40°C to +85°C) ......................................................................................185 mA

Maximum current sourced by all ports (+85°C to +125°C) .....................................................................................70 mA

Note 1: Power dissipation is calculated as follows:

Pdis = VDD x {IDD –  IOH} +  {(VDD – VOH) x IOH} + (VOL x IOL)

2: Voltage spikes below VSS at the MCLR/VPP/RE3 pin, inducing currents greater than 80 mA, may cause

latch-up. Thus, a series resistor of 50-100 should be used when applying a “low” level to the MCLR/VPP/

RE3 pin, rather than pulling this pin directly to VSS.

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

 2010 Microchip Technology Inc.

Preliminary

DS41412A-page 423

Share Link: