PIC18LF46K22-I/SO View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC18LF46K22-I/SO
Microchip Technology
PIC18LF46K22-I/SO Datasheet PDF : 494 Pages
| |||
PIC18(L)F2X/4XK22
27.5 DC Characteristics: Primary Run Supply Current, PIC18(L)F2X/4XK22
PIC18LF2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA +125°C
PIC18F2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA +125°C
Param
No.
Device Characteristics
Typ Max Units
Conditions
D070
D071
Supply Current (IDD)(1) (2)
0.25
0.50
mA -40°C to +125°C
mA -40°C to +125°C
VDD = 1.8V
VDD = 3.0V
FOSC = 1 MHz
(PRI_RUN,
EC oscillator)
D072
D073
D074
mA -40°C to +125°C VDD = 1.8V FOSC = 1 MHz
0.30
mA -40°C to +125°C VDD = 3.0V (PRI_RUN,
EC oscillator)
0.30
mA -40°C to +125°C VDD = 5.0V
D075
D076
2.70
mA -40°C to +125°C VDD = 1.8V FOSC = 20 MHz
(PRI_RUN,
4.30
mA -40°C to +125°C VDD = 3.0V EC oscillator)
D077
D078
D079
mA -40°C to +125°C VDD = 1.8V FOSC = 20 MHz
3.36
mA -40°C to +125°C VDD = 3.0V (PRI_RUN,
EC oscillator)
3.44
mA -40°C to +125°C VDD = 5.0V
D080
12.20
mA -40°C to +125°C
VDD = 3.0V
FOSC = 64 MHz
(PRI_RUN,
EC oscillator)
D081
D082
8.63
10.22
mA -40°C to +125°C
mA -40°C to +125°C
VDD = 3.0V
VDD = 5.0V
FOSC = 64 MHz
(PRI_RUN,
EC oscillator)
D083
D084
2.10
mA -40°C to +125°C VDD = 1.8V FOSC = 4 MHz
16 MHz Internal
4.20
mA -40°C to +125°C VDD = 3.0V (PRI_RUN + PLL,
HFINTOSC)
D085
D086
D087
mA -40°C to +125°C
mA -40°C to +125°C
mA -40°C to +125°C
VDD = 1.8V
VDD = 3.0V
VDD = 5.0V
FOSC = 4 MHz
16 MHz Internal
(PRI_RUN + PLL,
HFINTOSC)
D088
12.20
mA -40°C to +125°C
VDD = 3.0V
FOSC = 16 MHz
64 MHz Internal
(PRI_RUN + PLL,
HFINTOSC)
Note 1:
2:
The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as
I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temper-
ature, also have an impact on the current consumption.
The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD;
MCLR = VDD; WDT enabled/disabled as specified.
The test conditions for all IDD measurements in active operation mode are:
All I/O pins set as outputs driven to VSS;
MCLR = VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI-IDLE only).
2010 Microchip Technology Inc.
Preliminary
DS41412A-page 433
Share Link: 