PIC18F96J65T-I/PF View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC18F96J65T-I/PF
Microchip Technology
PIC18F96J65T-I/PF Datasheet PDF : 492 Pages
| |||
PIC18F97J60 FAMILY
A CM Reset behaves similarly to a Master Clear Reset,
RESET instruction, WDT time-out or Stack Event Reset.
As with all hard and power Reset events, the device
Configuration Words are reloaded from the Flash Con-
figuration Words in program memory as the device
restarts.
5.6 Power-up Timer (PWRT)
PIC18F97J60 family of devices incorporates an
on-chip Power-up Timer (PWRT) to help regulate the
Power-on Reset process. The PWRT is always
enabled. The main function is to ensure that the device
voltage is stable before code is executed.
The Power-up Timer (PWRT) of the PIC18F97J60 fam-
ily devices is an 11-bit counter which uses the INTRC
source as the clock input. This yields an approximate
time interval of 2048 x 32 s = 66 ms. While the PWRT
is counting, the device is held in Reset.
The power-up time delay depends on the INTRC clock
and will vary from chip-to-chip due to temperature and
process variation. See DC Parameter 33 for details.
5.6.1 TIME-OUT SEQUENCE
The PWRT time-out is invoked after the POR pulse has
cleared. The total time-out will vary based on the status
of the PWRT. Figure 5-3, Figure 5-4, Figure 5-5 and
Figure 5-6 all depict time-out sequences on power-up.
Since the time-outs occur from the POR pulse, if MCLR
is kept low long enough, the PWRT will expire. Bringing
MCLR high will begin execution immediately
(Figure 5-5). This is useful for testing purposes or to
synchronize more than one PIC18FXXJ6X device
operating in parallel.
FIGURE 5-3:
TIME-OUT SEQUENCE ON POWER-UP (MCLR TIED TO VDD, VDD RISE < TPWRT)
VDD
MCLR
INTERNAL POR
PWRT TIME-OUT
INTERNAL RESET
TPWRT
FIGURE 5-4:
TIME-OUT SEQUENCE ON POWER-UP (MCLR NOT TIED TO VDD): CASE 1
VDD
MCLR
INTERNAL POR
PWRT TIME-OUT
INTERNAL RESET
TPWRT
DS39762F-page 66
2011 Microchip Technology Inc.
Share Link: 