PIC32MX210F016DT-50I/SO View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC32MX210F016DT-50I/SO

32-bit Microcontrollers (up to 256 KB Flash and 64 KB SRAM) with Audio and Graphics Interfaces, USB, and Advanced Analog

Microchip Technology 

PIC32MX1XX/2XX

TABLE 29-12: COMPARATOR SPECIFICATIONS

DC CHARACTERISTICS

Standard Operating Conditions (see Note 4): 2.3V to 3.6V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +105°C for V-temp

Param.

No.

Symbol

Characteristics

Min. Typical Max. Units

Comments

D300 VIOFF Input Offset Voltage

—

±7.5 ±25

mV AVDD = VDD,

AVSS = VSS

D301 VICM

Input Common Mode Voltage

0

—

VDD

V AVDD = VDD,

AVSS = VSS

(Note 2)

D302 CMRR Common Mode Rejection Ratio 55

—

—

dB Max VICM = (VDD - 1)V

(Note 2)

D303 TRESP Response Time

—

150 400

ns AVDD = VDD,

AVSS = VSS

(Notes 1,2)

D304 ON2OV Comparator Enabled to Output

—

—

10

μs Comparator module is

Valid

configured before setting

the comparator ON bit

(Note 2)

D305 IVREF Internal Voltage Reference

1.14 1.2 1.26

V

—

D312 TSET

Internal Voltage Reference

—

—

10

µs

—

Setting time (Note 3)

Note 1: Response time measured with one comparator input at (VDD – 1.5)/2, while the other input transitions

from VSS to VDD.

2: These parameters are characterized but not tested.

3: Settling time measured while CVRR = 1 and CVR<3:0> transitions from ‘0000’ to ‘1111’. This parameter is

characterized, but not tested in manufacturing.

4: The Comparator module is functional at VBORMIN < VDD < VDDMIN, but with degraded performance. Unless

otherwise stated, module functionality is tested, but not characterized.

TABLE 29-13: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS

DC CHARACTERISTICS

Standard Operating Conditions: 2.3V to 3.6V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +105°C for V-temp

Param.

No.

Symbol

Characteristics

Min. Typical Max. Units

Comments

D321 CEFC External Filter Capacitor Value 8

10

— μF Capacitor must be low series

resistance (1 ohm). Typical

voltage on the VCAP pin is

1.8V.

DS60001168F-page 254

© 2011-2014 Microchip Technology Inc.

Share Link: