ST7FMC1M7T3 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

ST7FMC1M7T3

8-bit MCU with nested interrupts, Flash, 10-bit ADC, brushless motor control, five timers, SPI, LINSCI™

STMicroelectronics 

ST7MC1xx/ST7MC2xx

ON-CHIP PERIPHERALS (Cont’d)

PWM CONTROL REGISTER (PWMCR)

Read / Write

Reset Value: 0000 0000 (00h)

7

0

OE3 OE2 OE1 OE0 OP3 OP2 OP1 OP0

DUTY CYCLE REGISTERS (PWMDCRx)

Read / Write

Reset Value: 0000 0000 (00h)

7

0

DC7 DC6 DC5 DC4 DC3 DC2 DC1 DC0

Bit 7:4 = OE[3:0] PWM Output Enable

These bits are set and cleared by software. They

enable or disable the PWM output channels inde-

pendently acting on the corresponding I/O pin.

0: PWM output disabled.

1: PWM output enabled.

Bit 3:0 = OP[3:0] PWM Output Polarity

These bits are set and cleared by software. They

independently select the polarity of the four PWM

output signals.

PWMx output level

Counter <= OCRx

1

0

Counter > OCRx

0

1

OPx

0

1

Note: When an OPx bit is modified, the PWMx out-

put signal polarity is immediately reversed.

Bit 7:0 = DC[7:0] Duty Cycle Data

These bits are set and cleared by software.

A PWMDCRx register is associated with the OCRx

register of each PWM channel to determine the

second edge location of the PWM signal (the first

edge location is common to all channels and given

by the ARTARR register). These PWMDCR regis-

ters allow the duty cycle to be set independently

for each PWM channel.

73/309

1

Share Link: