ST92163L View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

ST92163L

8/16-BIT FULL SPEED USB MCU FOR COMPOSITE DEVICES WITH 16 ENDPOINTS, 20K ROM, 2K RAM, I2C, SCI, & MFT

STMicroelectronics 

ST92163 - ELECTRICAL CHARACTERISTICS

9 ELECTRICAL CHARACTERISTICS

The ST92163 device contains circuitry to protect

the inputs against damage due to high static volt-

age or electric field. Nevertheless it is advised to

take normal precautions and to avoid applying to

this high impedance voltage circuit any voltage

higher than the maximum rated voltages. It is rec-

ommended for proper operation that VIN and VOUT

be constrained to the range:

VSS ≤ (VIN or VOUT) ≤ VDD

To enhance reliability of operation, it is recom-

mended to connect unused inputs to an appropri-

ate logic voltage level such as VSS or VDD.

All the voltages in the following table, are refer-

enced to VSS.

ABSOLUTE MAXIMUM RATINGS

Symbol

VDD

VI

VAI

VO

TSTG

IINJ

AVDD

AVSS

Supply Voltage

Input Voltage

Parameter

Analog Input Voltage (A/D Converter)

Output Voltage

Storage Temperature

Pin Injection Current Digital and Analog Input

Maximum Accumulated Pin injection Current in the device

A/D Converter Analog Reference

A/D Converter VSS

Value

– 0.3 to +7.0

– 0.3 to VDD +0.3

VSS - 0.3 to VDD +0.3

AVSS - 0.3 to AVDD +0.3

– 0.3 to VDD +0.3

– 55 to + 150

-5 to +5

-50 to +50

VDD -0.3 to VDD +0.3

VSS -0.3 to VSS +0.3

Unit

V

V

V

V

°C

mA

mA

V

V

Note: Stresses above those listed as “absolute maximum ratings“ may cause permanent damage to the device. This is a stress rating only

and functional operation of the device at these conditions is not implied. Exposure to maximum rating conditions for extended periods may

affect device reliability. All voltages are referenced to VSS

RECOMMENDED OPERATING CONDITIONS

(Normal Voltage Mode, all devices)

Symbol

Parameter

TA

VDD

fINTCLK

Operating Temperature

Operating Supply Voltage

Internal Clock Frequency @ 4.0V - 5.5V

Note 1. 1MHz when A/D is used

Min.

0

4.0

0 (1)

Value

Max.

70

5.5

24

Unit

°C

V

MHz

RECOMMENDED OPERATING CONDITIONS

(Low Voltage Modes, devices with suffix L or V))

Symbol

Parameter

TA

VDD

fINTCLK

Operating Temperature

Operating Supply Voltage

Internal Clock Frequency @ 3.0V - 4.0V

8-MHz Low Voltage devices

(devices with suffix L)

16-MHz Low Voltage devices

(devices with suffix V)

Value

Min.

Max.

0

70

3.0

4.0

0(1)

8

0(1)

16

Unit

°C

V

MHz

MHz

Note 1. 1MHz when A/D is used

201/224

Share Link: