STM1066 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM1066

Smart voltage supervisor

STMicroelectronics 

STM1066

5

DC and AC characteristics

DC and AC characteristics

This section summarizes the operating measurement conditions and the DC and AC

characteristics of the device. The parameters in the DC and AC characteristics tables that

follow are derived from tests performed under the measurement conditions summarized in

Table 4: Operating and AC measurement conditions. Designers should check that the

operating conditions in their circuit match the operating conditions when relying on the

quoted parameters.

Table 4. Operating and AC measurement conditions

Parameter

Condition

Unit

VCC supply voltage

Ambient operating temperature (TA)

Input rise and fall times

2.7 to 5.5

V

–30 to 85

°C

≤5

ns

Figure 11. Waveforms

VCC

(VBAT )

VTH+

~2.3V

EN (VBUS )

EN VIH

EN VIL

VTH-

~2.1V

INHIBIT

VIN (5V

input

option)

OUT

Output

follows

Vin

Note:

ai 13919

VIN assumed to be from 1.6 V to 5.5 V. No VIN means no signal on OUT pin. If there is no

VCC then there will be no VIN.

13/20

Share Link: