STM32F030R4T6(2013) View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM32F030R4T6
(Rev.:2013)

Value-line ARM®-based 32-bit MCU with up to 256-KB Flash, timers, ADC, communication interfaces, 2.4-3.6 V operation

STMicroelectronics 

Electrical characteristics

STM32F030x4 STM32F030x6 STM32F030x8

6.1.7

Current consumption measurement

Figure 11. Current consumption measurement scheme

IDD

VDD

IDDA

VDDA

6.2

MS32142V1

Absolute maximum ratings

Stresses above the absolute maximum ratings listed in Table 15: Voltage characteristics,

Table 16: Current characteristics, and Table 17: Thermal characteristics may cause

permanent damage to the device. These are stress ratings only and functional operation of

the device at these conditions is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

Symbol

Table 15. Voltage characteristics(1)

Ratings

Min

Max

Unit

VDD–VSS

VDD–VDDA

VIN(2)

External main supply voltage (including

VDDA and VDD)

Allowed voltage difference for VDD > VDDA

Input voltage on FT and FTf pins

Input voltage on TTa pins

Input voltage on any other pin

|VDDx| Variations between different VDD power pins

|VSSX VSS|

Variations between all the different ground

pins

–0.3

-

VSS  0.3

VSS  0.3

VSS 0.3

-

-

4.0

V

0.4

V

VDD + 4.0

V

4.0

V

4.0

V

50

mV

50

mV

VESD(HBM)

Electrostatic discharge voltage (human

body model)

see Section 6.3.12: Electrical

sensitivity characteristics

1. All main power (VDD, VDDA) and ground (VSS, VSSA) pins must always be connected to the

external power supply, in the permitted range.

2. VIN maximum must always be respected. Refer to Table 16: Current characteristics for the

maximum allowed injected current values.

38/88

DocID024849 Rev 1

Share Link: