STM32F030RC(2015) View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM32F030RC
(Rev.:2015)

Value-line ARM®-based 32-bit MCU with up to 256-KB Flash, timers, ADC, communication interfaces, 2.4-3.6 V operation

STMicroelectronics 

Functional overview

STM32F030x4/6/8/C

1. Where X means supported.

2. Not available on STM32F030x4/6 devices.

3. Available only on STM32F030xC devices.

3.15

Serial peripheral interface (SPI)

Up to two SPIs are able to communicate up to 18 Mbit/s in slave and master modes in full-

duplex and half-duplex communication modes. The 3-bit prescaler gives 8 master mode

frequencies and the frame size is configurable from 4 bits to 16 bits.

SPI1 and SPI2 are identical and implement the set of features shown in the following table.

Table 9. STM32F030x4/6/8/C SPI implementation

SPI features(1)

SPI1

Hardware CRC calculation

X

Rx/Tx FIFO

X

NSS pulse mode

X

TI mode

X

1. X = supported.

2. Not available on STM32F030x4/6.

SPI2(2)

X

X

X

X

3.16

Serial wire debug port (SW-DP)

An ARM SW-DP interface is provided to allow a serial wire debugging tool to be connected

to the MCU.

23/96

DocID024849 Rev 2

Share Link: