T89C51RD2-3CSCM View Datasheet(PDF) - Atmel Corporation

Part Name

Description

Manufacturer

T89C51RD2-3CSCM

0 to 40MHz Flash Programmable 8-bit Microcontroller

Atmel Corporation 

Full Chip Erase

The ISP command "Full Chip Erase" erases all User Flash memory (fills with FFh) and

sets some Bytes used by the bootloader at their default values:

• BSB = FFh

• SBV = FCh

• SSB = FFh and finally erase the Software Security Bits

The Full Chip Erase does not affect the bootloader.

Checksum Error

When a checksum error is detected send ‘X’ followed with CR&LF.

Flow Description

Overview

An initialization step must be performed after each Reset. After microcontroller reset,

the bootloader waits for an autobaud sequence ( see section ‘autobaud performance’).

When the communication is initialized the protocol depends on the record type

requested by the host.

FLIP, a software utility to implement ISP programming with a PC, is available from the

Atmel the web site.

Communication Initialization The host initializes the communication by sending a ’U’ character to help the bootloader

to compute the baudrate (autobaud).

Figure 25. Initialization

Host

Bootloader

Init Communication

"U"

Performs Autobaud

If (not received "U")

Else

Communication Opened

Sends Back ‘U’ Character

"U"

66 T89C51RD2

4243G–8051–05/03

Share Link: