MACH131SP-7VC View Datasheet(PDF) - Lattice Semiconductor

Part Name

Description

Manufacturer

MACH131SP-7VC

High-Performance EE CMOS Programmable Logic

Lattice Semiconductor 

ABSOLUTE MAXIMUM RATINGS

Storage Temperature . . . . . . . . . . . . . .-65°C to +150°C

Ambient Temperature

With Power Applied . . . . . . . . . . . . . .-55°C to +125°C

Device Junction Temperature . . . . . . . . . . . . . +150°C

Supply Voltage with

Respect to Ground . . . . . . . . . . . . . . . -0.5 V to +7.0 V

DC Input Voltage . . . . . . . . . . . . -0.5 V to VCC +0.5 V

DC Output or I/O Pin Voltage . . -0.5 V to VCC +0.5 V

Static Discharge Voltage . . . . . . . . . . . . . . . . . 2001 V

Latchup Current (TA = -40°C to +85°C). . . . . . . 200 mA

Stresses above those listed under Absolute Maximum Ratings

may cause permanent device failure. Functionality at or above

these limits is not implied. Exposure to Absolute Maximum Rat-

ings for extended periods may affect device reliability.

OPERATING RANGES

Commercial (C) Devices

Ambient Temperature (TA)

Operating in Free Air . . . . . . . . . . . . . . . 0°C to +70°C

Supply Voltage (VCC)

with Respect to Ground . . . . . . . . . +4.75 V to +5.25 V

Operating ranges define those limits between which the func-

tionality of the device is guaranteed.

Industrial (I) Devices

Ambient Temperature (TA)

Operating in Free Air . . . . . . . . . . . . . . -40°C to +85°C

Supply Voltage (VCC)

with Respect to Ground . . . . . . . . . . . +4.5 V to +5.5 V

Operating ranges define those limits between which the

functionality of the device is guaranteed.

DC CHARACTERISTICS OVER OPERATING RANGES

Parameter

Symbol

Parameter Description

Test Description

Min

VOH

Output HIGH Voltage

VOL

Output LOW Voltage

VIH

Input HIGH Voltage

IOH = –3.2 mA, VCC = Min, VIN = VIH or VIL

2.4

IOH = –300 µA, VCC = Max, VIN = VIH or VIL (Note 1)

IOL = 16 mA, VCC = Min, VIN = VIH or VIL (Note 2)

Guaranteed Input Logical HIGH Voltage for all Inputs

(Note 3)

2.0

VIL

Input LOW Voltage

Guaranteed Input Logical LOW Voltage for all Inputs

(Note 3)

IIH

Input HIGH Leakage Current

VIN = 5.25 V, V VCC = Max (Note 4)

IIL

Input LOW Leakage Current

VIN = 0 V, VCC = Max (Note 4)

IOZH

Off-State Output Leakage Current HIGH VOUT = 5.25 V, VCC = Max, VIN = VIH or VIL (Note 4)

IOZL

Off-State Output Leakage Current LOW VOUT = 0 V, VCC = Max, VIN = VIH or VIL (Note 4)

ISC

Output Short-Circuit Current

VOUT = 0.5 V VCC = Max (Note 5)

–30

Typ

Max

Unit

V

3.5

V

0.5

V

V

0.8

V

10

µA

–10

µA

10

µA

–10

µA

–130 (Note 6),

–160

mA

Notes:

1. This applies to MACH111SP, MACH131SP, and die code “B” or later for MACH211(SP) and MACH231(SP). This does not apply

to MACH111, MACH131, MACH221(SP), and die code “A” for MACH211(SP) and MACH231(SP).

2. Total IOL for one PAL block should not exceed 64 mA.

3. These are absolute values with respect to device ground, and all overshoots due to system and/or tester noise are included.

4. I/O pin leakage is the worst case of IIL and IOZL (or IIH and IOZH).

5. Not more than one output should be shorted at a time. Duration of the short-circuit should not exceed one second.

VOUT = 0.5 V has been chosen to avoid test problems caused by tester ground degradation.

6. For commercial temperature range only.

24

MACH 1 & 2 Families

Share Link: