PIC16F505-EMC View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC16F505-EMC Datasheet PDF : 110 Pages
| |||
PIC12F508/509/16F505
10.1 DC Characteristics: PIC12F508/509/16F505 (Industrial)
DC Characteristics
Standard Operating Conditions (unless otherwise specified)
Operating Temperature -40°C ≤ TA ≤ +85°C (industrial)
Param
No.
Sym.
Characteristic
Min. Typ(1) Max. Units
Conditions
D001
D002
VDD Supply Voltage
2.0
VDR RAM Data Retention Voltage(2) —
5.5
1.5* —
V See Figure 10-1
V Device in Sleep mode
D003 VPOR VDD Start Voltage to ensure
Power-on Reset
— Vss —
V See Section 7.4 "Power-on
Reset (POR)" for details
D004
D010
SVDD VDD Rise Rate to ensure
Power-on Reset
IDD Supply Current(3,4)
0.05* —
— V/ms See Section 7.4 "Power-on
Reset (POR)" for details
— 175 275 μA FOSC = 4 MHz, VDD = 2.0V
— 0.625 1.1 mA FOSC = 4 MHz, VDD = 5.0V
— 500 650 μA FOSC = 10 MHz, VDD = 3.0V
— 1.5 2.2 mA FOSC = 20 MHz, VDD = 5.0V
(PIC16F505 only)
D020 IPD Power-down Current(5)
D022 IWDT WDT Current(5)
—
11 20 μA FOSC = 32 kHz, VDD = 2.0V
—
38 54 μA FOSC = 32 kHz, VDD = 5.0V
— 0.1 1.2 μA VDD = 2.0V
— 0.35 2.4 μA VDD = 5.0V
— 1.0 3.0 μA VDD = 2.0V
— 7.0 16.0 μA VDD = 5.0V
* These parameters are characterized but not tested.
Note 1: Data in the Typical (“Typ”) column is based on characterization results at 25°C. This data is for design
guidance only and is not tested.
2: This is the limit to which VDD can be lowered in Sleep mode without losing RAM data.
3: The supply current is mainly a function of the operating voltage and frequency. Other factors such as bus
loading, oscillator type, bus rate, internal code execution pattern and temperature also have an impact on
the current consumption.
4: The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VSS, T0CKI = VDD, MCLR =
VDD; WDT enabled/disabled as specified.
5: For standby current measurements, the conditions are the same as IDD, except that the device is in Sleep
mode. If a module current is listed, the current is for that specific module enabled and the device in Sleep.
© 2009 Microchip Technology Inc.
DS41236E-page 71
Share Link: 