STM32F215ZEH6V View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM32F215ZEH6V

ARM-based 32-bit MCU, 150DMIPs, up to 1 MB Flash/128+4KB RAM, crypto, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera

STMicroelectronics 

STM32F21xxx

Revision history

Table 92. Document revision history (continued)

Date

Revision

Changes

25-Nov-2010

Added WLCSP66 (64+2) package. Added note 1 related to LQFP176

on cover page.

Update I/Os in Section : Features.

Updated Table 5: Multi-AHB matrix.

Added case of BOR inactivation using IRROFF on WLCSP devices in

Section 2.2.15: Power supply supervisor.

Reworked Section 2.2.16: Voltage regulator to clarify regulator off

modes. Added Section 2.2.19: VBAT operation.

Modified VDD_3 pin in Table 5: STM32F21x pin and ball definitions, and

added note related to the FSMC_NL pin.

Renamed BYPASS-REG REGOFF, and add IRROFF pin.

Changed VSS_SA to VSS, and VDD_SA pin reserved for future use.

Updated maximum HSE crystal frequency to 26 MHz.

USART4/5 renamed UART4/5. USART4 pins renamed UART4 in

Table 5: STM32F21x pin and ball definitions. Updated LIN and IrDA

features for UART4/5 in Table 4: USART feature comparison.

Section 5.2: Absolute maximum ratings: Updated VIN minimum and

maximum values and note for non-five-volt tolerant pins in Table 8:

Voltage characteristics. Updated IINJ(PIN) maximum values and related

notes in Table 9: Current characteristics.

Updated VDDA minimum value in Table 11: General operating

conditions.

Added Note 2 and updated Maximum CPU frequency in Table 12:

3

Limitations depending on the operating power supply range; and

added Figure 18: Number of wait states versus fCPU and VDD range.

Renamed Brownout Low, medium and High reset thresholds,

Renamed VBORL/VBORM/VBORH, VBOR1/VBOR2/VBOR3 in Table 16:

Embedded reset and power control block characteristics.

Changed fLSI typical value in Table 30: LSI oscillator characteristics.

Added Figure 32: ACCLSI versus temperature.

Changed fOSC_IN maximum value in Table 27: HSE 4-26 MHz oscillator

characteristics.

Changed fPLL_IN maximum value in Table 31: Main PLL characteristics,

and updated jitter parameters in Table 32: PLLI2S (audio PLL)

characteristics.

Section 5.3.16: I/O port characteristics: updated VIH and VIL in

Table 43: I/O static characteristics.

Added Note 1 below Table 44: Output voltage characteristics.

Updated RPD and RPU parameter description in Table 54: USB OTG

FS DC electrical characteristics.

Updated VREF+ minimum value in Table 63: ADC characteristics.

Updated Table 68: Embedded internal reference voltage.

Removed Ethernet and USB2 for 64-pin devices in Table 91: Main

applications versus package for STM32F2xxx microcontrollers.

Added A.2: Application example with regulator OFF, removed “OTG

FS connection with external PHY” figure, updated Figure 84,

Figure 85, and Figure 87 to add STULPI01B.

Doc ID 17050 Rev 8

163/173

Share Link: