STM32F051T8H6 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM32F051T8H6

ARM®-based 32-bit MCU, 16 to 64 KB Flash, 11 timers, ADC, DAC and communication interfaces, 2.0-3.6 V

STMicroelectronics 

STM32F051x4 STM32F051x6 STM32F051x8

Revision history

Date

13-Jan-2014

Table 76. Document revision history (continued)

Revision

Changes

Modified datasheet title.

Added packages UFQFPN48 and UFBGA64.

Replaced “backup domain with “RTC domain” throughout the

document.

Changed SRAM value from “4 to 8 Kbyte” to “8 Kbyte”

Replaced IWWDG with IWDG in Figure: Block diagram.

Added inputs LSI and LSE to the multiplexer in Figure: Clock

tree.

Added feature “Reference clock detection” in Section: Real-time

clock (RTC) and backup registers.

Modified junction temperature in Table: Thermal characteristics.

Renamed Table: Internal voltage reference calibration values.

Replaced VDD with VDDA and VRERINT with ΔVREFINT in Table:

Embedded internal reference voltage.

Rephrased introduction of Section: Touch sensing controller

(TSC).

4

Rephrased Section: Voltage regulator.

Added sentence “If this is used when the voltage regulator is put

in low power mode...” under “Stop mode” in Section: Low-power

modes.

Removed sentence “The internal voltage reference is also

connected to ADC_IN17 input channel of the ADC.” in Section:

Comparators (COMP).

Removed feature “Periodic wakeup from Stop/Standby” in

Section: Real-time clock (RTC) and backup registers.

Replaced IDD with IDDA in Table: HSI oscillator characteristics,

Table: HSI14 oscillator characteristics and Table: LSI oscillator

characteristics.

Moved section “Wakeup time from low-power mode” to

Section 6.3.6 and rephrased the section.

Added lines D2 and E2 in Table: UFQFPN48 – 7 x 7 mm, 0.5

mm pitch, package mechanical data.

Added “The peripheral clock used is 48 MHz.” in Section On-

chip peripheral current consumption.

DocID022265 Rev 7

117/122

121

Share Link: