AT91SAM9G20-CU View Datasheet(PDF) - Atmel Corporation
Part Name
Description
Manufacturer
AT91SAM9G20-CU Datasheet PDF : 42 Pages
| |||
– Three external clock inputs
– Five internal clock inputs
– Two multi-purpose input/output signals
• Each block contains two global registers that act on all three TC Channels
Note:
TC Block 0 (TC0, TC1, TC2) and TC Block 1 (TC3, TC4, TC5) have identical user interfaces. See
Figure 8-1, “AT91SAM9G20 Memory Mapping,” on page 19 for TC Block 0 and TC Block 1 base
addresses.
10.4.6
Multimedia Card Interface
• One double-channel MultiMedia Card Interface
• Compatibility with MultiMedia Card Specification Version 3.11
• Compatibility with SD Memory Card Specification Version 1.1
• Compatibility with SDIO Specification Version V1.0.
• Card clock rate up to Master Clock divided by 2
• Embedded power management to slow down clock rate when not used
• MCI has two slots, each supporting
– One slot for one MultiMediaCard bus (up to 30 cards) or
– One SD Memory Card
• Support for stream, block and multi-block data read and write
10.4.7
USB Host Port
• Compliance with Open HCI Rev 1.0 Specification
• Compliance with USB V2.0 Full-speed and Low-speed Specification
• Supports both Low-Speed 1.5 Mbps and Full-speed 12 Mbps devices
• Root hub integrated with two downstream USB ports in the 217-LFBGA package
• Two embedded USB transceivers
• Supports power management
• Operates as a master on the Matrix
10.4.8
USB Device Port
• USB V2.0 full-speed compliant, 12 MBits per second
• Embedded USB V2.0 full-speed transceiver
• Embedded 2,432-byte dual-port RAM for endpoints
• Suspend/Resume logic
• Ping-pong mode (two memory banks) for isochronous and bulk endpoints
• Six general-purpose endpoints
– Endpoint 0 and 3: 64 bytes, no ping-pong mode
– Endpoint 1 and 2: 64 bytes, ping-pong mode
– Endpoint 4 and 5: 512 bytes, ping-pong mode
• Embedded pad pull-up
36 AT91SAM9G20 Summary
6384CS–ATARM–11-Mar-09
Share Link: 