STM8S007C8T6TR(2015) View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM8S007C8T6TR
(Rev.:2015)

Value line, 24 MHz STM8S 8-bit MCU, 64 Kbytes Flash, true data EEPROM, 10-bit ADC, timers, 2 UARTs, SPI, I²C

STMicroelectronics 

STM8S007C8

Product overview

The size of the UBC is programmable through the UBC option byte (Table 12), in increments

of 1 page (512 bytes) by programming the UBC option byte in ICP mode.

This divides the program memory into two areas:

 Main program memory: 64 Kbytes minus UBC

 User-specific boot code (UBC): Configurable up to 64 Kbytes

The UBC area remains write-protected during in-application programming. This means that

the MASS keys do not unlock the UBC area. It protects the memory used to store the boot

program, specific code libraries, reset and interrupt vectors, the reset routine and usually

the IAP and communication routines.

Figure 2. Flash memory organisation

Data

EEPROM

memory

64 Kbytes

Flash

program

memory

Data memory area (up to 2 Kbytes)

Option bytes

UBC area

Remains write protected during IAP

Program memory area

Write access possible for IAP

Programmable area from 1 Kbyte

(2 first pages) up to 64 Kbytes

(1 page steps)

Read-out protection (ROP)

The read-out protection blocks reading and writing the Flash program memory and data

EEPROM memory in ICP mode (and debug mode). Once the read-out protection is

activated, any attempt to toggle its status triggers a global erase of the program and data

memory. Even if no protection can be considered as totally unbreakable, the feature

provides a very high level of protection for a general purpose microcontroller.

DocID022171 Rev 5

13/92

25

Share Link: