STM8S003K3U6CTR View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM8S003K3U6CTR

Value line, 16-MHz STM8S 8-bit MCU, 8-Kbyte Flash memory, 128-byte data EEPROM, 10-bit ADC, 3 timers, UART, SPI, I²C

STMicroelectronics 

STM8S003F3 STM8S003K3

Electrical characteristics

9.3.1

VCAP external capacitor

Stabilization for the main regulator is achieved connecting an external capacitor CEXT to the

VCAP pin. CEXT is specified in Table 19. Care should be taken to limit the series inductance

to less than 15 nH.

Figure 10. External capacitor CEXT

C

ESL

9.3.2

ESR

RLeak

1. Legend: ESR is the equivalent series resistance and ESL is the equivalent inductance.

MSv36488V1

Supply current characteristics

The current consumption is measured as described in Section 9.1.5: Pin input voltage.

Total current consumption in run mode

The MCU is placed under the following conditions:

• All I/O pins in input mode with a static value at VDD or VSS (no load)

• All peripherals are disabled (clock stopped by Peripheral Clock Gating registers)

except if explicitly mentioned.

Subject to general operating conditions for VDD and TA.

DS7147 Rev 10

51/103

87

Share Link: