PIC16F1503T-ESL View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC16F1503T-ESL Datasheet PDF : 352 Pages
| |||
PIC16(L)F1503
MOVWI
Syntax:
Operands:
Operation:
Status Affected:
Move W to INDFn
[ label ] MOVWI ++FSRn
[ label ] MOVWI --FSRn
[ label ] MOVWI FSRn++
[ label ] MOVWI FSRn--
[ label ] MOVWI k[FSRn]
n [0,1]
mm [00,01, 10, 11]
-32 k 31
W INDFn
Effective address is determined by
• FSR + 1 (preincrement)
• FSR - 1 (predecrement)
• FSR + k (relative offset)
After the Move, the FSR value will be
either:
• FSR + 1 (all increments)
• FSR - 1 (all decrements)
Unchanged
None
Mode
Syntax
mm
Preincrement
++FSRn
00
Predecrement
--FSRn
01
Postincrement
FSRn++
10
Postdecrement
FSRn--
11
Description:
This instruction is used to move data
between W and one of the indirect
registers (INDFn). Before/after this
move, the pointer (FSRn) is updated by
pre/post incrementing/decrementing it.
Note: The INDFn registers are not
physical registers. Any instruction that
accesses an INDFn register actually
accesses the register at the address
specified by the FSRn.
FSRn is limited to the range 0000h -
FFFFh. Incrementing/decrementing it
beyond these bounds will cause it to
wrap-around.
The increment/decrement operation on
FSRn WILL NOT affect any Status bits.
NOP
Syntax:
Operands:
Operation:
Status Affected:
Description:
Words:
Cycles:
Example:
No Operation
[ label ] NOP
None
No operation
None
No operation.
1
1
NOP
OPTION
Syntax:
Operands:
Operation:
Status Affected:
Description:
Load OPTION_REG Register
with W
[ label ] OPTION
None
(W) OPTION_REG
None
Move data from W register to
OPTION_REG register.
RESET
Syntax:
Operands:
Operation:
Status Affected:
Description:
Software Reset
[ label ] RESET
None
Execute a device Reset. Resets the
nRI flag of the PCON register.
None
This instruction provides a way to
execute a hardware Reset by soft-
ware.
2011-2015 Microchip Technology Inc.
DS40001607D-page 261
Share Link: 