AT90PWM2B-16SU View Datasheet(PDF) - Atmel Corporation

Part Name

Description

Manufacturer

AT90PWM2B-16SU

8-bit Atmel Microcontroller with 8K Bytes In-System Programmable Flash

Atmel Corporation 

AT90PWM2/3/2B/3B

21. Analog to Digital Converter - ADC

21.1 Features

• 10-bit Resolution

• 0.5 LSB Integral Non-linearity

• ± 2 LSB Absolute Accuracy

• 8- 320 µs Conversion Time

• Up to 125 kSPS at Maximum Resolution

• 11 Multiplexed Single Ended Input Channels

• Two Differential input channels with accurate programmable gain 5, 10, 20 and 40

• Optional Left Adjustment for ADC Result Readout

• 0 - VCC ADC Input Voltage Range

• Selectable 2.56 V ADC Reference Voltage

• Free Running or Single Conversion Mode

• ADC Start Conversion by Auto Triggering on Interrupt Sources

• Interrupt on ADC Conversion Complete

• Sleep Mode Noise Canceler

The AT90PWM2/2B/3/3B features a 10-bit successive approximation ADC. The ADC is con-

nected to an 15-channel Analog Multiplexer which allows eleven single-ended input. The single-

ended voltage inputs refer to 0V (GND).

The device also supports 2 differential voltage input combinations which are equipped with a

programmable gain stage, providing amplification steps of 14dB (5x), 20 dB (10x), 26 dB (20x),

or 32dB (40x) on the differential input voltage before the A/D conversion. On the amplified chan-

nels, 8-bit resolution can be expected.

The ADC contains a Sample and Hold circuit which ensures that the input voltage to the ADC is

held at a constant level during conversion. A block diagram of the ADC is shown in Figure 21-1.

The ADC has a separate analog supply voltage pin, AVCC. AVCC must not differ more than ±

0.3V from VCC. See the paragraph “ADC Noise Canceler” on page 241 on how to connect this

pin.

Internal reference voltages of nominally 2.56V or AVCC are provided On-chip. The voltage refer-

ence may be externally decoupled at the AREF pin by a capacitor for better noise performance.

4317K–AVR–03/2013

234

Share Link: