DSPIC33FJ64GP706AE/PF View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

DSPIC33FJ64GP706AE/PF

High-Performance, 16-Bit Digital Signal Controllers

Microchip Technology 

dsPIC33FJXXXGPX06A/X08A/X10A

REGISTER 18-2: UxSTA: UARTx STATUS AND CONTROL REGISTER (CONTINUED)

bit 5

ADDEN: Address Character Detect bit (bit 8 of received data = 1)

1 = Address Detect mode enabled. If 9-bit mode is not selected, this does not take effect

0 = Address Detect mode disabled

bit 4

RIDLE: Receiver Idle bit (read-only)

1 = Receiver is Idle

0 = Receiver is active

bit 3

PERR: Parity Error Status bit (read-only)

1 = Parity error has been detected for the current character (character at the top of the receive FIFO)

0 = Parity error has not been detected

bit 2

FERR: Framing Error Status bit (read-only)

1 = Framing error has been detected for the current character (character at the top of the receive

FIFO)

0 = Framing error has not been detected

bit 1

OERR: Receive Buffer Overrun Error Status bit (read/clear only)

1 = Receive buffer has overflowed

0 = Receive buffer has not overflowed. Clearing a previously set OERR bit (1 →0 transition) will reset

the receiver buffer and the UxRSR to the empty state

bit 0

URXDA: Receive Buffer Data Available bit (read-only)

1 = Receive buffer has data, at least one more character can be read

0 = Receive buffer is empty

Note 1: Refer to Section 17. “UART” (DS70188) in the “dsPIC33F/PIC24H Family Reference Manual” for

information on enabling the UART module for transmit operation.

© 2011 Microchip Technology Inc.

DS70593C-page 201

Share Link: