DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

DSPIC33FJ128GP310AI/MR View Datasheet(PDF) - Microchip Technology

Part Name
Description
Manufacturer
DSPIC33FJ128GP310AI/MR
Microchip
Microchip Technology 
DSPIC33FJ128GP310AI/MR Datasheet PDF : 350 Pages
First Prev 81 82 83 84 85 86 87 88 89 90 Next Last
dsPIC33FJXXXGPX06A/X08A/X10A
REGISTER 5-1: NVMCON: FLASH MEMORY CONTROL REGISTER
R/SO-0(1)
R/W-0(1)
R/W-0(1)
U-0
U-0
U-0
U-0
WR
WREN
WRERR
bit 15
U-0
bit 7
R/W-0(1)
U-0
ERASE
U-0
R/W-0(1)
R/W-0(1)
R/W-0(1)
NVMOP<3:0>(2)
U-0
bit 8
R/W-0(1)
bit 0
Legend:
R = Readable bit
-n = Value at POR
SO = Settable only bit
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
bit 14
bit 13
bit 12-7
bit 6
bit 5-4
bit 3-0
WR: Write Control bit
1 = Initiates a Flash memory program or erase operation. The operation is self-timed and the bit is
cleared by hardware once operation is complete
0 = Program or erase operation is complete and inactive
WREN: Write Enable bit
1 = Enable Flash program/erase operations
0 = Inhibit Flash program/erase operations
WRERR: Write Sequence Error Flag bit
1 = An improper program or erase sequence attempt or termination has occurred (bit is set
automatically on any set attempt of the WR bit)
0 = The program or erase operation completed normally
Unimplemented: Read as ‘0
ERASE: Erase/Program Enable bit
1 = Perform the erase operation specified by NVMOP<3:0> on the next WR command
0 = Perform the program operation specified by NVMOP<3:0> on the next WR command
Unimplemented: Read as ‘0
NVMOP<3:0>: NVM Operation Select bits(2)
If ERASE = 1:
1111 = Memory bulk erase operation
1110 = Reserved
1101 = Erase General Segment
1100 = Erase Secure Segment
1011 = Reserved
0011 = No operation
0010 = Memory page erase operation
0001 = No operation
0000 = Erase a single Configuration register byte
If ERASE = 0:
1111 = No operation
1110 = Reserved
1101 = No operation
1100 = No operation
1011 = Reserved
0011 = Memory word program operation
0010 = No operation
0001 = Memory row program operation
0000 = Program a single Configuration register byte
Note 1: These bits can only be reset on POR.
2: All other combinations of NVMOP<3:0> are unimplemented.
© 2011 Microchip Technology Inc.
DS70593C-page 83

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]