dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04 AND dsPIC33FJ128MCX02/X04
REGISTER 23-2: DAC1STAT: DAC STATUS REGISTER
R/W-0
U-0
R/W-0
U-0
U-0
LOEN
—
LMVOEN
—
—
bit 15
R/W-0
LITYPE
R-0
LFULL
R-0
LEMPTY
bit 8
R/W-0
ROEN
bit 7
U-0
R/W-0
U-0
—
RMVOEN
—
U-0
R/W-0
R-0
R-0
—
RITYPE
RFULL
REMPTY
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
bit 14
bit 13
bit 12-11
bit 10
bit 9
bit 8
bit 7
bit 6
bit 5
bit 4-3
bit 2
bit 1
bit 0
LOEN: Left Channel DAC Output Enable bit
1 = Positive and negative DAC outputs are enabled
0 = DAC outputs are disabled
Unimplemented: Read as ‘0’
LMVOEN: Left Channel Midpoint DAC Output Voltage Enable bit
1 = Midpoint DAC output is enabled
0 = Midpoint output is disabled
Unimplemented: Read as ‘0’
LITYPE: Left Channel Type of Interrupt bit
1 = Interrupt if FIFO is EMPTY
0 = Interrupt if FIFO is NOT FULL
LFULL: Status, Left Channel Data Input FIFO is FULL bit
1 = FIFO is Full
0 = FIFO is not Full
LEMPTY: Status, Left Channel Data Input FIFO is EMPTY bit
1 = FIFO is Empty
0 = FIFO is not Empty
ROEN: Right Channel DAC Output Enable bit
1 = Positive and negative DAC outputs are enabled
0 = DAC outputs are disabled
Unimplemented: Read as ‘0’
RMVOEN: Right Channel Midpoint DAC Output Voltage Enable bit
1 = Midpoint DAC output is enabled
0 = Midpoint output is disabled
Unimplemented: Read as ‘0’
RITYPE: Right Channel Type of Interrupt bit
1 = Interrupt if FIFO is EMPTY
0 = Interrupt if FIFO is NOT FULL
RFULL: Status, Right Channel Data Input FIFO is FULL bit
1 = FIFO is Full
0 = FIFO is not Full
REMPTY: Status, Right Channel Data Input FIFO is EMPTY bit
1 = FIFO is Empty
0 = FIFO is not Empty
© 2007-2012 Microchip Technology Inc.
DS70291G-page 301