STM32F302VCT7TR View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM32F302VCT7TR

ARM®-based Cortex®-M4 32b MCU+FPU, up to 256KB Flash+ 40KB SRAM, 2 ADCs, 1 DAC ch., 4 comp, 2 PGA, timers, 2.0-3.6 V

STMicroelectronics 

STM32F302xB STM32F302xC

Functional overview

3.19

• 17-bit Auto-reload counter for periodic interrupt with wakeup from STOP/STANDBY

capability.

The RTC clock sources can be:

• A 32.768 kHz external crystal

• A resonator or oscillator

• The internal low-power RC oscillator (typical frequency of 40 kHz)

• The high-speed external clock divided by 32.

Inter-integrated circuit interface (I2C)

Up to two I2C bus interfaces can operate in multimaster and slave modes. They can support

standard (up to 100 KHz), fast (up to 400 KHz) and fast mode + (up to 1 MHz) modes.

Both support 7-bit and 10-bit addressing modes, multiple 7-bit slave addresses

(2 addresses, 1 with configurable mask). They also include programmable analog and

digital noise filters.

Table 6. Comparison of I2C analog and digital filters

Analog filter

Digital filter

Pulse width of

suppressed spikes

50 ns

Programmable length from 1 to 15

I2C peripheral clocks

Benefits

Available in Stop mode

1. Extra filtering capability vs.

standard requirements.

2. Stable length

Drawbacks

Variations depending on

temperature, voltage, process

Wakeup from Stop on address

match is not available when digital

filter is enabled.

In addition, they provide hardware support for SMBUS 2.0 and PMBUS 1.1: ARP capability,

Host notify protocol, hardware CRC (PEC) generation/verification, timeouts verifications and

ALERT protocol management. They also have a clock domain independent from the CPU

clock, allowing the I2Cx (x=1,2) to wake up the MCU from Stop mode on address match.

The I2C interfaces can be served by the DMA controller.

Refer to Table 7 for the features available in I2C1 and I2C2.

Table 7. STM32F302xB/STM32F302xC I2C implementation

I2C features(1)

I2C1

I2C2

7-bit addressing mode

10-bit addressing mode

Standard mode (up to 100 kbit/s)

Fast mode (up to 400 kbit/s)

Fast Mode Plus with 20mA output drive I/Os (up to 1 Mbit/s)

Independent clock

X

X

X

X

X

X

X

X

X

X

X

X

DocID025186 Rev 7

25/144

53

Share Link: