STM32F302CC View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM32F302CC

ARM®-based Cortex®-M4 32b MCU+FPU, up to 256KB Flash+ 40KB SRAM, 2 ADCs, 1 DAC ch., 4 comp, 2 PGA, timers, 2.0-3.6 V

STMicroelectronics 

Electrical characteristics

STM32F302xB STM32F302xC

Note:

For CL1 and CL2, it is recommended to use high-quality external ceramic capacitors in the

5 pF to 25 pF range (typ.), designed for high-frequency applications, and selected to match

the requirements of the crystal or resonator (see Figure 16). CL1 and CL2 are usually the

same size. The crystal manufacturer typically specifies a load capacitance which is the

series combination of CL1 and CL2. PCB and MCU pin capacitance must be included (10 pF

can be used as a rough estimate of the combined pin and board capacitance) when sizing

CL1 and CL2.

For information on selecting the crystal, refer to the application note AN2867 “Oscillator

design guide for ST microcontrollers” available from the ST website www.st.com.

Figure 16. Typical application with an 8 MHz crystal

5HVRQDWRUZLWKLQWHJUDWHG

FDSDFLWRUV

&/

26&B,1

I+6(

0+]

UHVRQDWRU

%LDV

FRQWUROOHG

5)

JDLQ

5(;7 

26&B287

&/

1. REXT value depends on the crystal characteristics.

069

76/144

DocID025186 Rev 7

Share Link: