DSPIC33FJ16GS102-I/SO View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

DSPIC33FJ16GS102-I/SO

High-Performance, 16-bit Digital Signal Controllers

Microchip Technology 

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04

TABLE 24-17: PLL CLOCK TIMING SPECIFICATIONS (VDD = 3.0V TO 3.6V)

AC CHARACTERISTICS

Standard Operating Conditions: 3.0V to 3.6V (unless otherwise

stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No.

Symbol

Characteristic

Min Typ(1) Max Units

Conditions

OS50 FPLLI

PLL Voltage Controlled

Oscillator (VCO) Input

Frequency Range

0.8

—

8

MHz ECPLL, XTPLL modes

OS51 FSYS

On-Chip VCO System

Frequency

100

—

200 MHz

OS52 TLOCK PLL Start-up Time (Lock Time) 0.9

1.5

3.1 mS

OS53 DCLK CLKO Stability (Jitter)

-3

0.5

3

% Measured over 100 ms

period

Note 1: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance only

and are not tested in manufacturing.

TABLE 24-18: AUXILIARY PLL CLOCK TIMING SPECIFICATIONS (VDD = 3.0V TO 3.6V)

AC CHARACTERISTICS

Standard Operating Conditions: 3.0V to 3.6V (unless otherwise

stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No.

Symbol

Characteristic

Min Typ(1) Max Units

Conditions

FHPOUT 0n-Chip 16x PLL CCO

Frequency

105 120 135 MHz

FHPIN

On-Chip 16x PLL Phase

Detector Input Frequency

6.56 7.5 8.44 MHz

TSU

Frequency Generator Lock

Time

—

—

10

μs

Note 1: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance only

and are not tested in manufacturing.

TABLE 24-19: AC CHARACTERISTICS: INTERNAL RC ACCURACY

AC CHARACTERISTICS

Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)

Operating temperature

-40°C ≤ TA ≤ +85°C for industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No.

Characteristic

Min Typ Max Units

Conditions

Internal FRC Accuracy @ FRC Frequency = 7.37 MHz(1,2)

F20

FRC

—

±2

—

% -40°C ≤ TA ≤ +85°C VDD = 3.0-3.6V

FRC

—

±5

—

% -40°C ≤ TA ≤ +125°C VDD = 3.0-3.6V

Note 1: Frequency calibrated at +25°C and 3.3V. TUN bits can be used to compensate for temperature drift.

2: FRC is set to initial frequency of 7.37 MHz (±2%) at +25°C.

DS70318D-page 294

Preliminary

© 2009 Microchip Technology Inc.

Share Link: