STM8AF6168UC View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM8AF6168UC

Automotive 8-bit MCU, with up to32 Kbytes Flash, data EEPROM, 10-bit ADC, timers, LIN, SPI, I2C, 3 to 5.5V

STMicroelectronics 

Electrical characteristics

STM8AF61xx, STM8AF62xx

Table 20. Current characteristics

Symbol

Ratings

Max.

Unit

IVDDIO

IVSSIO

IIO

IINJ(PIN)(4)

IINJ(TOT)

Total current into VDDIO power lines (source)(1)(2)(3)

Total current out of VSS IO ground lines (sink)(1)(2)(3)

Output current sunk by any I/O and control pin

Output current source by any I/Os and control pin

Injected current on any pin

Sum of injected currents

100

100

20

mA

-20

±10

50

1. All power (VDD, VDDIO, VDDA) and ground (VSS, VSSIO, VSSA) pins must always be connected to the

external supply.

2. The total limit applies to the sum of operation and injected currents.

3. VDDIO includes the sum of the positive injection currents. VSSIO includes the sum of the negative injection

currents.

4. This condition is implicitly insured if VIN maximum is respected. If VIN maximum cannot be respected, the

injection current must be limited externally to the IINJ(PIN) value. A positive injection is induced by VIN > VDD

while a negative injection is induced by VIN < VSS. For true open-drain pads, there is no positive injection

current allowed and the corresponding VIN maximum must always be respected.

Table 21. Thermal characteristics

Symbol

Ratings

Value

Unit

TSTG

TJ

Table 22.

Storage temperature range

Maximum junction temperature

Operating lifetime(1)

−65 to 150

°C

160

Symbol

Ratings

Value

Unit

OLF

Conforming to AEC-Q100 rev G

−40 to 125 °C

−40 to 150 °C

Grade 1

Grade 0

1. For detailed mission profile analysis, please contact your local ST Sales Office.

48/89

Doc ID 14952 Rev 6

Share Link: