S25FL256SDPMFNE10 View Datasheet(PDF) - Cypress Semiconductor

Part Name

Description

Manufacturer

S25FL256SDPMFNE10

128 Mbit (16 Mbyte), 256 Mbit (32 Mbyte) 3.0V SPI Flash Memory

Cypress Semiconductor 

S25FL128S, S25FL256S

4. Electrical Specifications

4.1 Absolute Maximum Ratings

Table 4.1 Absolute Maximum Ratings

Storage Temperature Plastic Packages

Ambient Temperature with Power Applied

VCC

VIO (Note 1)

Input voltage with respect to Ground (VSS) (Note 2)

Output Short Circuit Current (Note 3)

–65°C to +150°C

–65°C to +125°C

–0.5V to +4.0V

–0.5V to +4.0V

–0.5V to +(VIO + 0.5V)

100 mA

Notes:

1. VIO must always be less than or equal VCC + 200 mV.

2. See Input Signal Overshoot on page 26 for allowed maximums during signal transition.

3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.

4. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those indicated in the operational sections of this data sheet is not implied. Exposure of the device to absolute maximum

rating conditions for extended periods may affect device reliability.

4.2 Operating Ranges

Operating ranges define those limits between which the functionality of the device is guaranteed.

4.2.1

Temperature Ranges

Industrial (I) Devices

Ambient Temperature (TA) ....................................... -40°C to +85°C

Industrial Plus (A) Devices

Ambient Temperature (TA) ....................................... -40°C to +105°C

Extended (N) Devices

Ambient Temperature (TA) ....................................... -40°C to +125°C

Industrial Plus operating and performance parameters will be determined by device characterization and may vary from standard

industrial temperature range devices as currently shown in this specification.

4.2.2

Power Supply Voltages

Some package options provide access to a separate input and output buffer power supply called VIO. Packages which do not

provide the separate VIO connection, internally connect the device VIO to VCC. For these packages the references to VIO are then

also references to VCC.

VCC ……………2.7V to 3.6V

VIO ...................1.65V to VCC + 200 mV

Document Number: 001-98283 Rev. *I

Page 25 of 144

Share Link: