PIC16HV785-I/SO View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16HV785-I/SO

20-Pin Flash-Based, 8-Bit CMOS Microcontroller with Two-Phase Asynchronous Feedback PWM Dual High-Speed Comparators and Dual Operational Amplifiers

Microchip Technology 

PIC16F785/HV785

2.2.2.6 PCON Register

The Power Control register contains flag bits to allow

differentiation between a Power-on Reset (POR), a

Brown-out Reset (BOR), a Watchdog Timer (WDT)

Reset (WDT) and an external MCLR Reset.

REGISTER 2-6: PCON: POWER CONTROL REGISTER

U-0

U-0

U-0

R/W-1

U-0

U-0

—

—

—

SBOREN(1)

—

bit 7

R/W-0

—

R/W-x

POR

bit 0

Legend:

R = Readable bit

-n = Value at POR

W = Writable bit

‘1’ = Bit is set

U = Unimplemented bit, read as ‘0’

‘0’ = Bit is cleared

x = Bit is unknown

bit 7-5

bit 4

bit 3-2

bit 1

bit 0

Unimplemented: Read as ‘0’

SBOREN: Software BOR Enable bit(1)

1 = BOR enabled

0 = BOR disabled

Unimplemented: Read as ‘0’

POR: Power-on Reset Status bit

1 = No Power-on Reset occurred

0 = A Power-on Reset occurred (must be set in software after a Power-on Reset occurs)

BOR: Brown-out Reset Status bit

1 = No Brown-out Reset occurred

0 = A Brown-out Reset occurred (must be set in software after a Brown-out Reset occurs)

Note 1: BOREN<1:0> = 01 in Configuration Word for this bit to control the BOR.

DS41249E-page 20

© 2008 Microchip Technology Inc.

Share Link: