ST62T46B/E46B
POWER SUPPLY SUPERVISOR (Continued)
4.6.1 PSS Operating Mode Description
The resistive voltage divider connected to the PSS
pin provides the internal comparator with the
nxVPSS/13 voltage. The resistive voltage divider
connected to the VDD pin provides the internal
comparator with the mxVDD/13 voltage. The n and
m values are selected with the PSS register. It
must be observed that the n and m values must be
selected, taking into consideration the following
electrical constraints:
Figure 32. Typical application using the PSS
0.5V < nxVPSS/13 at detection < VDD -2V
0.5V < mxVDD/13 at detection < VDD -2V
we must also have:
m-n-- VDD ≤ VPSS ≤ VDD
The PIF bit is the interrupt request flag of the PSS
device. This bit follows PSS comparator output.
VIN
L48xx
VDD
PSS
VSS
VR01837
53/72
389