ST72361J4-AUTO View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

ST72361J4-AUTO

8-bit MCU for automotive with Flash or ROM, 10-bit ADC, 5 timers, SPI, LINSCI™

STMicroelectronics 

Device configuration and ordering information

ST72361xx-Auto

Table 116. Alternate function remapping 1

AFI mapping 1

T16_OCMP1 on PD3

T16_OCMP2 on PD5

T16_ICAP1 on PD4

LINSCI2_SCK not available

LINSCI2_TDO not available

LINSCI2_RDI not available

T16_OCMP1 on PB6

T16_OCMP2 on PB7

T16_ICAP1 on PC0

LINSCI2_SCK on PD3

LINSCI2_TDO on PD5

LINSCI2_RDI on PD4

AFI_MAP(1)

0

1

Table 117. Alternate function remapping 0

AFI mapping 0

T16_ICAP2 is mapped on PD1

T16_ICAP2 is mapped on PC1

AFI_MAP(0)

0

1

OPT5:4 = OSCTYPE[1:0] Oscillator Type

These option bits select the ST7 main clock source type.

Table 118. OSCTYPE selection

Clock source

Resonator oscillator

Reserved

Reserved internal clock source (used only in ICC mode)

External source

OSCTYPE

1

0

0

0

1

0

1

1

OPT3:2 = OSCRANGE[1:0] Oscillator range

If the resonator oscillator type is selected, these option bits select the resonator oscillator.

This selection corresponds to the frequency range of the resonator used. If external source

is selected with the OSCTYPE option, then the OSCRANGE option must be selected with

the corresponding range.

Table 119. OSCRANGE selection

Typical frequency range

LP

1~2 MHz

MP

2~4 MHz

OSCRANGE

1

0

0

0

1

262/279

Doc ID 12468 Rev 3

Share Link: