QLX111GRX View Datasheet(PDF) - Intersil
Part Name
Description
Manufacturer
QLX111GRX Datasheet PDF : 10 Pages
| |||
QLx111GRx
Absolute Maximum Ratings
Supply Voltage (VDD to GND) . . . . . . . . . . . . -0.3V to 1.3V
Voltage at All Input Pins . . . . . . . . . . . -0.3V to VDD + 0.3V
ESD Rating
High Speed Pins . . . . . . . . . . . . . . . . . . . . . 1.5kV (HBM)
All Other Pins . . . . . . . . . . . . . . . . . . . . . . . . 2kV (HBM)
Thermal Information
Operating Ambient Temperature Range . . . . . . 0°C to +85°C
Storage Ambient Temperature Range . . . . -55°C to +150°C
Maximum Junction Temperature . . . . . . . . . . . . . . . +125°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact
product reliability and result in failures not covered by warranty.
Operating Conditions
PARAMETER
Supply Voltage
Operating Ambient Temperature
Bit Rate
SYMBOL
CONDITION
VDD
TA
NRZ data applied to any channel
MIN
1.1
0
2.5
TYP
1.2
25
MAX
1.3
70
11.1
UNITS
V
°C
Gb/s
Control Pin Characteristics Typical values are at VDD = 1.2V, TA = +25°C, and VIN = 600mVP-P, unless otherwise
noted. VDD = 1.1V to 1.3V, TA = 0°C to +85°C.
PARAMETER
SYMBOL
CONDITION
MIN TYP MAX UNITS
Input LOW Logic Level
VIL
DI, Clk, ENB
0
0
350
mV
Input HIGH Logic Level
VIH
DI, Clk, ENB
750
VDD
mV
Output LOW Logic Level
VOL
LOS, DO
0
0
250
mV
Output HIGH Logic Level
VOH LOS, DO
1000
VDD
mV
Input Current
Current draw on digital pin, i.e., CP[A,B], DI, Clk, ENB
30 100
µA
Electrical Specifications Typical values are at VDD = 1.2V, TA = +25°C, and VIN = 600mVP-P, unless otherwise noted.
VDD = 1.1V to 1.3V, TA = 0°C to +85°C.
PARAMETER
SYMBOL
CONDITION
MIN TYP MAX UNITS NOTES
Supply Current
Cable Input
Amplitude Range
IDD
VIN Measured differentially at data source
before encountering channel loss
111
mA
600 1200 1600 mVP-P
1
DC Differential
Input Resistance
Measured on input channel IN
80 100 120
Ω
DC Single-Ended
Input Resistance
Measured on input channel IN[P] or IN[N] 40
50
60
Ω
Input Return Loss
(Differential)
SDD11 100MHz to 7.5GHz
12
dB
2
Input Return Loss
(Common Mode)
SCC11 100MHz to 7.5GHz
7
dB
2
Input Return Loss
SDC11 100MHz to 7.5GHz
(Com. to Diff. Conversion)
35
dB
2
Output
Amplitude Range
VOUT Measured differentially at OUT[P] and
500 650 800 mVP-P
OUT[N] with 50Ω load on both output pins
Differential
Output Impedance
Measured on OUT
80 100 120
Ω
Output Return Loss
(Differential)
SDD22 100MHz to 7.5GHz
10
dB
2
Output Return Loss
(Common Mode)
SCC22 100MHz to 7.5GHz
5
dB
2
3
FN6987.0
October 26, 2009
Share Link: 