DMF-50174ZNB-FW データシートの表示（PDF） - Optrex Corporation
部品番号
コンポーネント説明
メーカー
DMF-50174ZNB-FW Datasheet PDF : 18 Pages
| |||
No.
Parameter
3 The Shape of Dot
(1) Dot Shape (with Dent)
0.15≧
Criteria
As per the sketch of left hand.
(2) Dot Shape (with Projection)
Should not be connected to next dot.
(3) Pin Hole
X
(X+Y) / 2≦0.2mm
Y
(Less than 0.1mm is no counted.)
(4) Deformation
Y
(X+Y) / 2≦0.2mm
X
Total acceptable number : 1/dot, 5/cell
(Defect number of (4) : 1pc.)
4
Polarizer Scratches Not to be conspicuous defects.
5
Polarizer Dirts
If the stains are removed easily from LCDP surface, the module is not
defective.
6
Complex Foreign
Black spots, line shaped foreign substances or air bubbles between
Substance Defects
glass & polarizer should be 5pcs maximum in total.
7
Distance between
D≦0.2 : 20mm or more
Different Foreign
0.2＜D : 40mm or more
Substance Defects
DMF-50174ZNB-FW (AT) No.2000-0166
OPTREX CORPORATION
OPTREX
Page 15/18
Share Link: 