STM32F101X6 データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

STM32F101X6

Low-density access line, ARM-based 32-bit MCU with 16 or 32 KB Flash, 5 timers, ADC and 4 communication interfaces

STMicroelectronics 

Electrical characteristics

STM32F101x4, STM32F101x6

5.3.15

5.3.16

TIM timer characteristics

The parameters given in Table 38 are guaranteed by design.

Refer to Section 5.3.12: I/O current injection characteristics for details on the input/output

alternate function characteristics (output compare, input capture, external clock, PWM

output).

Table 38. TIMx(1) characteristics

Symbol

Parameter

Conditions

Min

Max

Unit

tres(TIM) Timer resolution time

fTIMxCLK = 36 MHz

1

27.8

fEXT

Timer external clock

frequency on CH1 to CH4 fTIMxCLK = 36 MHz

0

0

fTIMxCLK/2

18

ResTIM Timer resolution

16

16-bit counter clock period

tCOUNTER when internal clock is

selected

1

fTIMxCLK = 36 MHz 0.0278

65536

1820

tMAX_COUNT Maximum possible count

fTIMxCLK = 36 MHz

65536 × 65536

119.2

1. TIMx is used as a general term to refer to the TIM2, TIM3 and TIM4 timers.

tTIMxCLK

ns

MHz

MHz

bit

tTIMxCLK

µs

tTIMxCLK

s

Communications interfaces

I2C interface characteristics

Unless otherwise specified, the parameters given in Table 39 are derived from tests

performed under the ambient temperature, fPCLK1 frequency and VDD supply voltage

conditions summarized in Table 8.

The STM32F101xx Low-density access line I2C interface meets the requirements of the

standard I2C communication protocol with the following restrictions: the I/O pins SDA and

SCL are mapped to are not “true” open-drain. When configured as open-drain, the PMOS

connected between the I/O pin and VDD is disabled, but is still present.

The I2C characteristics are described in Table 39. Refer also to Section 5.3.12: I/O current

injection characteristics for more details on the input/output alternate function characteristics

(SDA and SCL).

58/79

Doc ID 15058 Rev 5

Share Link: