M25P16-VMN6P データシートの表示（PDF） - Numonyx -> Micron
部品番号
コンポーネント説明
メーカー
M25P16-VMN6P Datasheet PDF : 55 Pages
| |||
DC and AC parameters
10 DC and AC parameters
M25P16
This section summarizes the operating and measurement conditions, and the DC and AC
characteristics of the device. The parameters in the DC and AC characteristic tables that
follow are derived from tests performed under the measurement conditions summarized in
the relevant tables. Designers should check that the operating conditions in their circuit
match the measurement conditions when relying on the quoted parameters.
Table 10. Operating conditions
Symbol
Parameter
Min
Max
Unit
VCC
Supply voltage
2.7
3.6
V
grade 3
–40
125
°C
TA
Ambient operating temperature
grade 6
–40
85
°C
Table 11. Data retention and endurance
Parameter
Condition
Min
Max
Unit
Erase/Program cycles
Data retention
Device grade 6
Device grade 3
at 55 °C
100 000
10 000
20
Cycles per sector
years
Table 12. AC measurement conditions
Symbol
Parameter
Min
Max
CL
Load capacitance
Input rise and fall times
Input pulse voltages
Input timing reference voltages
Output timing reference voltages
30
5
0.2VCC to 0.8VCC
0.3VCC to 0.7VCC
VCC / 2
Figure 22. AC measurement I/O waveform
Input levels
0.8VCC
0.2VCC
Input and output
timing reference levels
0.7VCC
0.5VCC
0.3VCC
AI07455
Table 13.
Symbol
Capacitance(1)
Parameter
Test Condition
Min
Max
COUT Output capacitance (Q)
VOUT = 0 V
8
CIN Input capacitance (other pins)
VIN = 0 V
6
1. Sampled only, not 100% tested, at TA = 25 °C and a frequency of 20 MHz.
Unit
pF
ns
V
V
V
Unit
pF
pF
38/55
Share Link: 