PIC16LF1936-ESS データシートの表示（PDF） - Microchip Technology

部品番号

コンポーネント説明

メーカー

PIC16LF1936-ESS

28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers with LCD Driver and nanoWatt XLP™ Technology

Microchip Technology 

PIC16F193X/LF193X

28.4

DC Characteristics: PIC16F193X/LF193X-I/E

DC CHARACTERISTICS

Standard Operating Conditions (unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for industrial

-40°C ≤ TA ≤ +125°C for extended

Param

No.

Sym.

Characteristic

Min.

Typ†

Max. Units

Conditions

VIL

Input Low Voltage

I/O PORT:

D030

with TTL buffer

—

—

0.8

V 4.5V ≤ VDD ≤ 5.5V

D030A

—

—

0.15 VDD V 1.8V ≤ VDD ≤ 4.5V

D031

with Schmitt Trigger buffer

—

with I2C™ levels

—

—

0.2 VDD V 2.0V ≤ VDD ≤ 5.5V

—

0.3 VDD V

D032

with SMBus™ levels

—

MCLR, OSC1 (RC mode)(1)

—

—

0.8

V 2.7V ≤ VDD ≤ 5.5V

—

0.2 VDD V

D033A

OSC1 (HS mode)

—

—

0.3 VDD V

VIH

Input High Voltage

I/O ports:

—

—

D040

with TTL buffer

2.0

—

—

V 4.5V ≤ VDD ≤ 5.5V

D040A

0.25 VDD +

—

0.8

—

V 1.8V ≤ VDD ≤ 4.5V

D041

with Schmitt Trigger buffer 0.8 VDD

—

with I2C™ levels

0.7 VDD

—

—

V 2.0V ≤ VDD ≤ 5.5V

—

V

with SMBus™ levels

2.1

—

—

V 2.7V ≤ VDD ≤ 5.5V

D042

MCLR

0.8 VDD

—

—

V

D043A

OSC1 (HS mode)

0.7 VDD

—

—

V

D043B

IIL

OSC1 (RC mode)

Input Leakage Current(2)

0.9 VDD

—

—

V (Note 1)

D060

D061

I/O ports

MCLR(3)

—

±5

± 100 nA VSS ≤ VPIN ≤ VDD, Pin at high-

impedance

±5

± 1000 nA 125°C

—

± 50

± 200

nA VSS ≤ VPIN ≤ VDD

D063

OSC1

—

± 50

± 100 nA VSS ≤ VPIN ≤ VDD, XT, HS and LP

oscillator configuration

IPUR Weak Pull-up Current

D070*

VOL

Output Low Voltage(4)

25

100

200

VDD = 3.3V, VPIN = VSS

25

140

300

μA VDD = 5.0V, VPIN = VSS

D080

I/O ports

IOH = 8mA, VDD = 5V

—

—

0.6

V IOH = 6mA, VDD = 3.3V

IOH = 3mA, VDD = 1.8V

Legend: TBD = To Be Determined

* These parameters are characterized but not tested.

† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are

not tested.

Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended to use an external

clock in RC mode.

2: Negative current is defined as current sourced by the pin.

3: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent

normal operating conditions. Higher leakage current may be measured at different input voltages.

4: Including OSC2 in CLKOUT mode.

© 2009 Microchip Technology Inc.

Preliminary

DS41364B-page 365

Share Link: