STM32F030CC(2015) データシートの表示（PDF） - STMicroelectronics
部品番号
コンポーネント説明
メーカー
STM32F030CC
(Rev.:2015)
(Rev.:2015)
STMicroelectronics
STM32F030CC Datasheet PDF : 96 Pages
| |||
STM32F030x4/6/8/C
Electrical characteristics
All Run-mode current consumption measurements given in this section are performed with a
reduced code that gives a consumption equivalent to CoreMark code.
Typical and maximum current consumption
The MCU is placed under the following conditions:
• All I/O pins are in analog input mode
• All peripherals are disabled except when explicitly mentioned
• The Flash memory access time is adjusted to the fHCLK frequency:
– 0 wait state and Prefetch OFF from 0 to 24 MHz
– 1 wait state and Prefetch ON above 24 MHz
• When the peripherals are enabled fPCLK = fHCLK
The parameters given in Table 25 to Table 27 are derived from tests performed under
ambient temperature and supply voltage conditions summarized in Table 21: General
operating conditions.
Table 25. Typical and maximum current consumption from VDD supply at VDD = 3.6 V(1)
All peripherals enabled
Parameter
Conditions
fHCLK
Max @ TA(2) Unit
Typ
85 °C
48 MHz(3)
48 MHz(4)
HSI or HSE clock, PLL on
Supply current in
24 MHz(3)
IDD Run mode, code
executing from Flash
24 MHz(4)
HSI or HSE clock, PLL off
8 MHz(3)
8 MHz(4)
48 MHz(3)
48 MHz(4)
HSI or HSE clock, PLL on
Supply current in
24 MHz(3)
IDD Run mode, code
executing from RAM
24 MHz(4)
HSI or HSE clock, PLL off
8 MHz(3)
8 MHz(4)
48 MHz(3)
48 MHz(4)
IDD
Supply current in HSI or HSE clock, PLL on
Sleep mode, code
executing from Flash
24 MHz(3)
24 MHz(4)
or RAM
8 MHz(3)
HSI or HSE clock, PLL off
8 MHz(4)
22.0(3)
26.8(4)
12.2(3)
14.1(4)
4.4(3)
4.9(4)
22.2(3)
26.1(4)
11.2(3)
13.3(4)
4.0(3)
4.6(4)
14(3)
17.0(4)
7.3(3)
8.7(4)
2.6(3)
3.0(4)
1. The gray shading is used to distinguish the values for STM32F030xC devices.
2. Data based on characterization results, not tested in production unless otherwise specified.
22.8(3)
30.2(4)
13.2(3)
mA
16.2(4)
5.2(3)
5.6(4)
23.2(3)
29.3(4)
12.2(3)
mA
15.7(4)
4.5(3)
5.2(4)
15.3(3)
19.0(4)
7.8(3)
mA
10.1(4)
2.9(3)
3.5(4)
DocID024849 Rev 2
47/96
80
Share Link: 