AT91SAM7X128C-CU データシートの表示（PDF） - Atmel Corporation

部品番号

コンポーネント説明

メーカー

AT91SAM7X128C-CU

AT91SAM ARM-based Flash MCU

Atmel Corporation 

– Higher priority interrupts can be served during service of lower priority interrupt

• Vectoring

– Optimizes interrupt service routine branch and execution

– One 32-bit vector register per interrupt source

– Interrupt vector register reads the corresponding current interrupt vector

• Protect Mode

– Easy debugging by preventing automatic operations

• Fast Forcing

– Permits redirecting any interrupt source on the fast interrupt

• General Interrupt Mask

– Provides processor synchronization on events without triggering an interrupt

9.5 Debug Unit

• Comprises:

– One two-pin UART

– One Interface for the Debug Communication Channel (DCC) support

– One set of Chip ID Registers

– One Interface providing ICE Access Prevention

• Two-pin UART

– USART-compatible User Interface

– Programmable Baud Rate Generator

– Parity, Framing and Overrun Error

– Automatic Echo, Local Loopback and Remote Loopback Channel Modes

• Debug Communication Channel Support

– Offers visibility of COMMRX and COMMTX signals from the ARM Processor

• Chip ID Registers

– Identification of the device revision, sizes of the embedded memories, set of

peripherals

– Chip ID is 0x275C 0A40 (MRL A) for SAM7X512

– Chip ID is 0x275B 0940 (MRL A or B) for SAM7X256

– Chip ID is 0x275B 0942 (MRL C) for SAM7X256

– Chip ID is 0x275A 0740 (MRL A or B) for SAM7X128

– Chip ID is 0x275A 0742 (MRL C) for SAM7X128

9.6 Periodic Interval Timer

• 20-bit programmable counter plus 12-bit interval counter

9.7 Watchdog Timer

• 12-bit key-protected Programmable Counter running on prescaled SLCK

• Provides reset or interrupt signals to the system

• Counter may be stopped while the processor is in debug state or in idle mode

28 SAM7X512/256/128 Summary

6120GS–ATARM–07-Apr-11

Share Link: