STM8S208RBT6B データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

STM8S208RBT6B

Performance line, 24 MHz STM8S 8-bit MCU, up to 128 KB Flash, integrated EEPROM, 10-bit ADC, timers, 2 UARTs, SPI, I²C, CAN

STMicroelectronics 

Revision history

STM8S207xx, STM8S208xx

Table 58. Document revision history (continued)

Date

Revision

Changes

14-Sep-2010

22-Mar-2011

10-Feb-2012

Added part number STM8S208M8 to Table 1: Device summary.

Updated "reset state" of Table 5: Legend/abbreviations for pinout

table.

Added footnote 4 to Table 6: Pin description.

Table 9: General hardware register map: standardized all reset state

values; updated the reset state values of RST_SR, CLK_SWCR,

10

CLK_HSITRIMR, CLK_SWIMCCR, IWDG_KR, and ADC_DRx

registers; added the reset values of the CAN paged registers.

Figure 36: Recommended reset pin protection: replaced 0.01 µF with

0.1 µF.

Figure 40: Typical application with I2C bus and timing diagram:

tw(SCKH), tw(SCKL), tr(SCK), and tf(SCK) replaced by tw(SCLH), tw(SCLL),

tr(SCL), and tf(SCL) respectively.

Table 1: Device summary: added STM8S207K8.

Table 2: STM8S20xxx performance line features: added

STM8S207K8 device and changed the RAM value of all other

devices to 6 Kbytes.

Figure 3, Figure 4, Figure 5, and Figure 7: removed TIM1_CH4 from

11

pins 80, 64, 48, and 32 respectively.

Table 6: Pin description: updated note 3 and added note 5.

Table 9: General hardware register map: removed I2C_PECR

register.

Section 10.3.7: Reset pin characteristics: added text regarding the

rest network.

Figure 1: STM8S20xxx performance line block diagram: updated

POR/PDR and BOR; updated LINUART input; added legend.

Table 18: General operating conditions: updated VCAP.

Table 26: Total current consumption in halt mode at VDD = 5 V:

updated title, modified existing max column, and added new max

column (at 125 °C) with data.

12

Table 37: I/O static characteristics: added new condition and new

max values for rise and fall time; added footnote 3; updated typ and

max pull-up resistor values.

Section 10.3.7: Reset pin characteristics: updated cross reference in

text below Figure 35

Table 41: NRST pin characteristics: updated typ and max values of

the NRST pull-up resistor.

102/103

Doc ID 14733 Rev 12

Share Link: