CS61310(2003) 데이터 시트보기 (PDF) - Cirrus Logic

부품명

상세내역

제조사

CS61310
(Rev.:2003)

T1 Line Interface Unit

Cirrus Logic 

CS61310

amplitude is written as an eight-bit byte, where the

first phase of the symbol is written first.

In serial-port host mode, the amplitude bytes are

written LSB first. The contents of the Arbitrary

Waveform register can be verified by reading the

Waveform Register.

Diagnostic Mode

Loopback Modes

Local Loopback (LLOOP)

Remote Loopback (RLOOP)

In-band Network Loopback (NLOOP)

Internal Data Pattern Generation and Detection

Transmit All Ones (TAOS)

In-band Loop-up/down Code Generator

Error Detection

Bipolar Violation Detection (BPV)

Alarm Condition Monitoring

Receive Loss of Signal Monitoring (LOS)

Receive Alarm Indication Signal Monitoring (AIS)

Other Diagnostic Reports

Receive Line Attenuation Indicator (LATN)

Availability (Note 1)

H/W

Host

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

No

Yes

Yes

Yes

Yes

Yes

No

Yes

Yes

Yes

Host Mode (Note 2)

Maskable

No

No

Yes

No

No

No

Yes

Yes

No

Table 5. CS61310 Diagnostic Mode Availability

Notes: 1. In Hardware Mode the Diagnostic Modes are selected by directly setting the pins on the device; in Host

Mode, the appropriate register bits are written for Diagnostic Modes.

2. In Host Mode the interrupts can be masked by writing a “1” to the LOS bit; there is no masking in the

Hardware Mode.

18

DS440F1 FEB ‘03

Share Link: