PIC10F220-I(2006) 데이터 시트보기 (PDF) - Microchip Technology

부품명

상세내역

제조사

PIC10F220-I
(Rev.:2006)

6-Pin, 8-Bit Flash Microcontrollers

Microchip Technology 

PIC10F220/222

10.0 ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings(†)

Ambient temperature under bias.............................................................................................................-40°C to +125°C

Storage temperature ...............................................................................................................................-65°C to +150°C

Voltage on VDD with respect to VSS ..................................................................................................................0 to +6.5V

Voltage on MCLR with respect to VSS.............................................................................................................0 to +13.5V

Voltage on all other pins with respect to VSS .................................................................................. -0.3V to (VDD + 0.3V)

Total power dissipation(1) .....................................................................................................................................200 mW

Max. current out of VSS pin .....................................................................................................................................80 mA

Max. current into VDD pin ........................................................................................................................................80 mA

Input clamp current, IIK (VI < 0 or VI > VDD)...................................................................................................................... ±20 mA

Output clamp current, IOK (VO < 0 or VO > VDD) .............................................................................................................. ±20 mA

Max. output current sunk by any I/O pin .................................................................................................................25 mA

Max. output current sourced by any I/O pin ............................................................................................................25 mA

Max. output current sourced by I/O port .................................................................................................................75 mA

Max. output current sunk by I/O port ......................................................................................................................75 mA

Note 1: Power dissipation is calculated as follows: PDIS = VDD x {IDD – ∑ IOH} + ∑ {(VDD – VOH) x IOH} .. + ∑(VOL x

IOL)

†NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above

those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions

for extended periods may affect device reliability.

© 2006 Microchip Technology Inc.

Preliminary

DS41270B-page 51

Share Link: