PIC16CR56AT/SP 데이터 시트보기 (PDF) - Microchip Technology
부품명
상세내역
제조사
PIC16CR56AT/SP Datasheet PDF : 192 Pages
| |||
PIC16C5X
19.2 DC Characteristics: PIC16C54C/C55A/C56A/C57C/C58B-40 (Commercial)(1)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise specified)
Operating Temperature 0°C TA +70C for commercial
Param
No.
Symbol
Characteristic
Min
Typ† Max Units
Conditions
D030
VIL Input Low Voltage
I/O Ports
MCLR (Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1
VSS
—
0.8
V 4.5V <VDD 5.5V
VSS
— 0.15 VDD V
VSS
— 0.15 VDD V
VSS
— 0.2 VDD V HS, 20 MHz FOSC 40 MHz
D040
VIH Input High Voltage
I/O ports
MCLR (Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1
2.0
—
VDD
V 4.5V < VDD 5.5V
0.85 VDD
—
VDD
V
0.85 VDD
—
VDD
V
0.8 VDD
—
VDD
V HS, 20 MHz FOSC 40 MHz
D050
VHYS Hysteresis of Schmitt
Trigger inputs
0.15 VDD* —
D060
IIL Input Leakage Current(2,3)
I/O ports
-1.0
0.5
MCLR
MCLR
T0CKI
OSC1
-5.0
—
—
0.5
-3.0
0.5
-3.0
0.5
—
+1.0
+5.0
+3.0
+3.0
—
V
For VDD 5.5V:
A VSS VPIN VDD,
pin at hi-impedance
A VPIN = VSS +0.25V
A VPIN = VDD
A VSS VPIN VDD
A VSS VPIN VDD, HS
D080
D090
VOL Output Low Voltage
I/O ports
VOH Output High Voltage(3)
I/O ports
—
—
0.6
VDD - 0.7
—
—
V IOL = 8.7 mA, VDD = 4.5V
V IOH = -5.4 mA, VDD = 4.5V
* These parameters are characterized but not tested.
† Data in the Typical (“Typ”) column is based on characterization results at 25C. This data is for design guidance
only and is not tested.
Note 1: Device operation between 20 MHz to 40 MHz requires the following: VDD between 4.5V to 5.5V, OSC1 pin
externally driven, OSC2 pin not connected and HS oscillator mode and commercial temperatures. For opera-
tion between DC and 20 MHz, See Section 17.3.
2: The leakage current on the MCLR/VPP pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input volt-
age.
3: Negative current is defined as coming out of the pin.
DS30453E-page 158
Preliminary
1997-2013 Microchip Technology Inc.
Share Link: 