PIC16F1936T-ESS 데이터 시트보기 (PDF) - Microchip Technology

부품명

상세내역

제조사

PIC16F1936T-ESS

28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers with LCD Driver and nanoWatt XLP™ Technology

Microchip Technology 

PIC16F193X/LF193X

28.4 DC Characteristics: PIC16F193X/LF193X-I/E (Continued)

DC CHARACTERISTICS

Standard Operating Conditions (unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for industrial

-40°C ≤ TA ≤ +125°C for extended

Param

No.

Sym.

Characteristic

Min.

Typ†

Max. Units

Conditions

VOH

Output High Voltage(4)

D090

I/O ports

VDD - 0.7

—

IOH = 3.5mA, VDD = 5V

—

V IOH = 3mA, VDD = 3.3V

IOH = 2mA, VDD = 1.8V

Capacitive Loading Specs on Output Pins

D101* COSC2 OSC2 pin

—

—

15

pF In XT, HS and LP modes when

external clock is used to drive

OSC1

D101A* CIO

All I/O pins

—

—

50

pF

VCAP Capacitor Charging

D102

Charging current

—

200

—

μA

D102A

Source/sink capability when

—

0.0

—

mA

charging complete

Legend: TBD = To Be Determined

* These parameters are characterized but not tested.

† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are

not tested.

Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended to use an external

clock in RC mode.

2: Negative current is defined as current sourced by the pin.

3: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent

normal operating conditions. Higher leakage current may be measured at different input voltages.

4: Including OSC2 in CLKOUT mode.

DS41364B-page 366

Preliminary

© 2009 Microchip Technology Inc.

Share Link: