PIC16LC711-20ESP 데이터 시트보기 (PDF) - Microchip Technology

부품명

상세내역

제조사

PIC16LC711-20ESP

8-Bit CMOS Microcontrollers with A/D Converter

Microchip Technology 

PIC16C71X

Applicable Devices 710 71 711 715

Standard Operating Conditions (unless otherwise stated)

DC CHARACTERISTICS

Operating temperature 0˚C

-40˚C

-40˚C

≤ TA ≤ +70˚C (commercial)

≤ TA ≤ +85˚C (industrial)

≤ TA ≤ +125˚C (extended)

Operating voltage VDD range as described in DC spec Section 13.1

and Section 13.2.

Param

Characteristic

Sym Min Typ Max Units

Conditions

No.

†

Output High Voltage

D090 I/O ports (Note 3)

VOH VDD - 0.7 -

-

V IOH = -3.0 mA, VDD = 4.5V,

-40°C to +85°C

D090A

VDD - 0.7 - -

V IOH = -2.5 mA, VDD = 4.5V,

-40°C to +125°C

D092 OSC2/CLKOUT (RC osc config)

VDD - 0.7 - -

V IOH = -1.3 mA, VDD = 4.5V,

-40°C to +85°C

D092A

VDD - 0.7 - -

V IOH = -1.0 mA, VDD = 4.5V,

-40°C to +125°C

Capacitive Loading Specs on

Output Pins

D100 OSC2 pin

COSC2

-

- 15 pF In XT, HS and LP modes when

external clock is used to drive

OSC1.

D101 All I/O pins and OSC2 (in RC mode) CIO

-

- 50 pF

† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only

and are not tested.

Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the

PIC16C7X be driven with external clock in RC mode.

2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels

represent normal operating conditions. Higher leakage current may be measured at different input voltages.

3: Negative current is defined as coming out of the pin.

DS30272A-page 116

© 1997 Microchip Technology Inc.

Share Link: