PIC16LC76-20/SO 데이터 시트보기 (PDF) - Microchip Technology

부품명

상세내역

제조사

PIC16LC76-20/SO

8-Bit CMOS Microcontrollers with A/D Converter

Microchip Technology 

PIC16C7X

Applicable Devices 72 73 73A 74 74A 76 77

20.0 ELECTRICAL CHARACTERISTICS FOR PIC16C76/77

Absolute Maximum Ratings †

Ambient temperature under bias..................................................................................................................-55 to +125˚C

Storage temperature ............................................................................................................................... -65˚C to +150˚C

Voltage on any pin with respect to VSS (except VDD, MCLR. and RA4)...........................................-0.3V to (VDD + 0.3V)

Voltage on VDD with respect to VSS ............................................................................................................ -0.3 to +7.5V

Voltage on MCLR with respect to VSS (Note 2) ................................................................................................. 0 to +14V

Voltage on RA4 with respect to Vss ................................................................................................................... 0 to +14V

Total power dissipation (Note 1).................................................................................................................................1.0W

Maximum current out of VSS pin ............................................................................................................................300 mA

Maximum current into VDD pin ...............................................................................................................................250 mA

Input clamp current, IIK (VI < 0 or VI > VDD) .....................................................................................................................± 20 mA

Output clamp current, IOK (VO < 0 or VO > VDD)..............................................................................................................± 20 mA

Maximum output current sunk by any I/O pin...........................................................................................................25 mA

Maximum output current sourced by any I/O pin .....................................................................................................25 mA

Maximum current sunk by PORTA, PORTB, and PORTE (combined) (Note 3).....................................................200 mA

Maximum current sourced by PORTA, PORTB, and PORTE (combined) (Note 3) ...............................................200 mA

Maximum current sunk by PORTC and PORTD (combined) (Note 3) ...................................................................200 mA

Maximum current sourced by PORTC and PORTD (combined) (Note 3)..............................................................200 mA

Note 1: Power dissipation is calculated as follows: Pdis = VDD x {IDD - ∑ IOH} + ∑ {(VDD - VOH) x IOH} + ∑(VOl x IOL)

Note 2: Voltage spikes below VSS at the MCLR pin, inducing currents greater than 80 mA, may cause latch-up. Thus,

a series resistor of 50-100Ω should be used when applying a “low” level to the MCLR pin rather than pulling

this pin directly to VSS.

Note 3: PORTD and PORTE are not implemented on the PIC16C76.

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

© 1997 Microchip Technology Inc.

DS30390E-page 219

Share Link: