STM32F051X8(2012) 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

제조사

STM32F051X8
(Rev.:2012)

Low- and medium-density advanced ARM™-based 32-bit MCU with 16 to 64 Kbytes Flash, timers, ADC, DAC and comm. interfaces

STMicroelectronics 

STM32F051x

Electrical characteristics

Prequalification trials

Most of the common failures (unexpected reset and program counter corruption) can be

reproduced by manually forcing a low state on the NRST pin or the Oscillator pins for 1

second.

To complete these trials, ESD stress can be applied directly on the device, over the range of

specification values. When unexpected behavior is detected, the software can be hardened

to prevent unrecoverable errors occurring (see application note AN1015).

Electromagnetic Interference (EMI)

The electromagnetic field emitted by the device are monitored while a simple application is

executed (toggling 2 LEDs through the I/O ports). This emission test is compliant with

IEC 61967-2 standard which specifies the test board and the pin loading.

Table 46. EMI characteristics

Symbol Parameter

Conditions

Monitored

frequency band

Max vs. [fHSE/fHCLK]

8/48 MHz

Unit

SEMI

Peak level

VDD = 3.6 V, TA = 25 °C,

LQFP64 package

compliant with IEC

61967-2

0.1 to 30 MHz

30 to 130 MHz

130 MHz to 1GHz

SAE EMI Level

-3

28

dBµV

23

4

-

6.3.11

Electrical sensitivity characteristics

Based on three different tests (ESD, LU) using specific measurement methods, the device is

stressed in order to determine its performance in terms of electrical sensitivity.

Electrostatic discharge (ESD)

Electrostatic discharges (a positive then a negative pulse separated by 1 second) are

applied to the pins of each sample according to each pin combination. The sample size

depends on the number of supply pins in the device (3 parts × (n+1) supply pins). This test

conforms to the JESD22-A114/C101 standard.

Table 47. ESD absolute maximum ratings

Symbol

Ratings

Conditions

Class Maximum value(1) Unit

VESD(HBM)

Electrostatic discharge

voltage (human body model)

TA = +25 °C, conforming

to JESD22-A114

2

VESD(CDM)

Electrostatic discharge

voltage (charge device

model)

TA = +25 °C, conforming

to JESD22-C101

II

2000

V

500

1. Data based on characterization results, not tested in production.

Doc ID 022265 Rev 3

67/105

Share Link: