DSPIC33FJ32GP302T-I/SO 데이터 시트보기 (PDF) - Microchip Technology

부품명

상세내역

제조사

DSPIC33FJ32GP302T-I/SO

High-Performance, 16-bit Digital Signal Controllers

Microchip Technology 

dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04, AND dsPIC33FJ128GPX02/X04

9.0 OSCILLATOR CONFIGURATION

Note 1: This data sheet summarizes the features

of the dsPIC33FJ32GP302/304,

dsPIC33FJ64GPX02/X04,

and

dsPIC33FJ128GPX02/X04 families of

devices. It is not intended to be a compre-

hensive reference source. To comple-

ment the information in this data sheet,

refer to “Section 39. Oscillator (Part

III)” (DS70216) of the “dsPIC33F/PIC24H

Family Reference Manual”, which is avail-

able from the Microchip website

(www.microchip.com).

2: Some registers and associated bits

described in this section may not be avail-

able on all devices. Refer to Section 4.0

“Memory Organization” in this data

sheet for device-specific register and bit

information.

The dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/

X04, and dsPIC33FJ128GPX02/X04 oscillator system

provides:

• External and internal oscillator options as clock

sources

• An on-chip Phase-Locked Loop (PLL) to scale the

internal operating frequency to the required sys-

tem clock frequency

• An internal FRC oscillator that can also be used

with the PLL, thereby allowing full-speed

operation without any external clock generation

hardware

• Clock switching between various clock sources

• Programmable clock postscaler for system power

savings

• A Fail-Safe Clock Monitor (FSCM) that detects

clock failure and takes fail-safe measures

• A Clock Control register (OSCCON)

• Non-volatile Configuration bits for main oscillator

selection

• An auxiliary crystal oscillator for Audio DAC

A simplified diagram of the oscillator system is shown

in Figure 9-1.

FIGURE 9-1:

dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04, AND dsPIC33FJ128GPX02/

X04 OSCILLATOR SYSTEM DIAGRAM

Primary Oscillator

OSC1

POSCCLK

XT, HS, EC

S2

DOZE<2:0>

R(2)

S3

XTPLL, HSPLL,

ECPLL, FRCPLL

S1

PLL

S1/S3

FCY

OSC2

FVCO(1)

POSCMD<1:0>

FRC

Oscillator

SOSCO

SOSCI

TUN<5:0>

LPRC

Oscillator

Secondary Oscillator

FRCDIV<2:0>

÷ 16

LPOSCEN

FRCDIVN S7

÷2

FRCDIV16 S6

FRC

S0

LPRC

S5

SOSC

S4

Clock Fail Clock Switch Reset

FP

FOSC

Auxiliary Oscillator

POSCCLK

AOSCCLK

AOSCMD<1:0>

S7

NOSC<2:0> FNOSC<2:0>

WDT, PWRT,

FSCM

Timer1

FVCO(1)

ACLK DAC

÷N

Note 1: See Figure 9-2 for PLL details.

ASRCSEL

SELACK

APSTSCLR<2:0>

2: If the Oscillator is used with XT or HS modes, an extended parallel resistor with the value of 1 M must be connected.

 2009 Microchip Technology Inc.

Preliminary

DS70292D-page 141

Share Link: